Dodge® 033676 LT700 Solidlube Pillow Block Plain Sleeve Bearing, 1-3/8 in Dia Bore, 4-11/16 to 5-7/16 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
033676
MFG #: 033676
Requires Quote
- Base to Bore Centerline: 1-7/8 in
- Base Width: 1-3/4 in
- Bolt Center-to-Center Length: 4-11/16 to 5-7/16 in
- Bore Diameter: 1-3/8 in
- Bore Type: Round
- Country of Origin: US
- Expansion Type: non-expansion (fixed)
- Finish: Powder Coated
- Load Capacity: 66 lb
- Manufacturer Name: Dodge Industrial
- Material: Cast Iron
- Maximum Speed: 1600 rpm
- Mounting Type: Two-Bolt Base
- Overall Height: 3-3/4 in
- Overall Length: 6-1/2 in
- Overall Width: 1-5/16 in
- Seal Type: Unsealed
- Series: LT700
- Temperature Rating: -40 to 700 deg F
- Type: Solidlube
Dodge® Pillow Block Plain Sleeve Bearing, Solidlube, Series: LT700, 1-3/8 in Bore, 4-11/16 to 5-7/16 in Bolt Center-to-Center Length, 1-7/8 in Base to Bore Centerline, 6-1/2 in Overall Length, 1-5/16 in Overall Width, 3-3/4 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-3/4 in Base Width, Unsealed Seal, Non-Expansion (Fixed), 66 lb Load, -40 to 700 deg F, 1600 rpm Maximum, Cast Iron, Powder Coated
- Item Features
- Application
- Self lubricating, statically self-aligning bearings for extreme industrial applications
- Good in temperature extremes and inaccessible locations
- Will function effectively in a vacuum
- Ideal where bearings are subject to dry cycles or where lube systems would be too costly
- Usable in many corrosive medias
- Will operate in submersible applications of some low viscosity liquids
- Recommended for slow speeds and limited shaft movement applications
For high heat, cold temperatures, submersible, corrosive chemical media, slow speed and limited shaft movement applications