Simpson Strong-Tie® Strong-Rod™ AT-XP30 AT-XP® High Strength Acrylic Adhesive, 30 oz Side-By-Side Cartridge, Liquid/Paste Form, Teal/Tan/White, 1.58
AT-XP30
MFG #: AT-XP30
Requires Quote
Simpson Strong-Tie® Strong-Rod™ Acrylic Adhesive, High Strength, Series: AT-XP®, Side-By-Side Cartridge Container, 30 oz Container, Acrylic Glass Base, Composition: (Resin Teal Side)-Portland Cement, Calcined Clay, Ethoxylated Bisphenol-A Dimethacrylate, Propylidynetimethyl Trimethyl Trimethacrylate, Crystalline Silica, Quartz, Tetrahydrofurfuryl Methacrylate, (Initiator White or Tan Side)-Dibenzoyl Peroxide, White Mineral Oil, Titanium Dioxide, Kaolin, Silicon Dioxide, Liquid/Paste Form, 24 hr Curing, Teal/Tan/White, 1.58 Specific Gravity, >200/159 deg F Flash Point, 0.4173611111 Mixing Ratio, 30 g/L VOC, Applicable Materials: Grouted Concrete Block, Cracked Concrete, Dry/Water Saturated Concrete and Masonry
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated tempera
- Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.
- Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
- 10:1 two-component high strength, acrylic-based anchoring adhesive
- Easy hole cleaning procedure no power-brushing required
- For best results store between 14 to 80 deg F
- Cures in substrate temperatures as low as 14 deg F in 24 hrs or less
- Threaded rod anchoring and rebar doweling into concrete and masonry
- Suitable for horizontal, vertical and overhead applications
- Surfaces to receive adhesive must be clean
- Base material temperature must be 14 deg F or above at the time of installation
- For best results, material should be 14 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Do not immerse cartridges in water to facilitate warming
- Mixed material in nozzle can harden in 3 to 4 min at temperatures of 70 deg F and above
- Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
- Modification or improper use of mixing nozzle may impair AT-XP® adhesive performance
- 12 months shelf life from date of manufacture in unopened container
- Compatible with ADT30S, ADTA30P or ADTA30CKT dispensing tool/AMN19Q mixing nozzle
Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads
Code listed under the IBC/IRC for cracked and uncracked concrete per IAPMO UES ER-263 and City of L.A. RR25960
Code listed under the IBC/IRC for masonry per IAPMO UES ER-281 and City of L.A. RR25966
10:1 two-component high strength, acrylic-based anchoring adhesive
Easy hole cleaning procedure no power-brushing required
For best results store between 14 to 80 deg F
Cures in substrate temperatures as low as 14 deg F in 24 hrs or less
Threaded rod anchoring and rebar doweling into concrete and masonry
Suitable for horizontal, vertical and overhead applications
Surfaces to receive adhesive must be clean
Base material temperature must be 14 deg F or above at the time of installation
For best results, material should be 14 to 80 deg F at time of application
To warm cold material, store cartridges in a warm, uniformly heated area or storage container
Do not immerse cartridges in water to facilitate warming
Mixed material in nozzle can harden in 3 to 4 min at temperatures of 70 deg F and above
Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
Modification or improper use of mixing nozzle may impair AT-XP® adhesive performance
12 months shelf life from date of manufacture in unopened container
Compatible with ADT30S, ADTA30P or ADTA30CKT dispensing tool/AMN19Q mixing nozzle