3M Canada

3M™ 5535A QS-III 5535A Cold Shrink In-Line Splice Kit, 35 kV, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 350 kcmil Conductor, 33 in L Splice, Silicon Rubber

5535A-3M MFG #: 5535A
$2,812.56 / EA
Estimated Delivery 7 to 10 Business Days
3M™ 5535A QS-III 5535A Cold Shrink In-Line Splice Kit, 35 kV, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 350 kcmil Conductor, 33 in L Splice, Silicon Rubber
  • Manufacturer: 3M
  • Color: Maroon
  • Brand: 3M™
3M™ Splice Kit, Cold Shrink In-Line, Series: QS-III 5535A, 35 kV, Longitudinally Corrugated/Tape Shield/UniShield®/Wire Shield Cable, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG, 250 kcmil, 350 kcmil Conductor, 1.07 to 1.7 in Insulation, 33 in Splice Length, 1 Conductor, 105 to 140 deg C, Silicon Rubber, Black, 3.6 in Dia Dimensions
QTY
Add to List
  • Re-enterable/repairable
  • In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielde
  • Sag-resistant formulation
  • Special electrode design of the kit reduces the electrical stress at a critical cable/splice interfa
  • Excellent adhesion
  • Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct bu
  • Paintable with primer
  • Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber ja
  • Quick cure and eliminates the need for mineral wool and caulk
  • High voltage, production-tested for partial discharge and AC ensure reliability
  • 50 to 120 deg F application temperature range
  • Cold shrink design for quick and easy installation
  • The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick i
  • Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudina
  • 0.51 to 1.7 in OD connector
  • 6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt conn
  • 1090 psi tensile strength
  • 610% elongation
  • 370 V/mil dielectric strength
Re-enterable/repairable
In-line splice for joining tape shield, wire shield, UniShield® or longitudinally corrugated shielded power cables
Sag-resistant formulation
Special electrode design of the kit reduces the electrical stress at a critical cable/splice interface
Excellent adhesion
Designed for in-line splicing, feeder and distribution circuits, size transition splicing, direct burial installations and submerged locations
Paintable with primer
Silicon rubber splice body provides good high and low temperature performance and the EPDM rubber jacket offers physical protection
Quick cure and eliminates the need for mineral wool and caulk
High voltage, production-tested for partial discharge and AC ensure reliability
50 to 120 deg F application temperature range
Cold shrink design for quick and easy installation
The cold shrink design fits type MV-90/MV-105 cables with copper conductors while ensuring a quick installation and better cable size transitions and 15,000 a rated for faults current protection
Used with in-line splicing, feeder and distribution circuits, tape, wire, UniShield® and longitudinally corrugated (LC) shielded cables, transitions from shielded to neutral power cables, copper or aluminum conductors, size transition splicing, direct bur
0.51 to 1.7 in OD connector
6 in aluminum/copper compression length, 6-1/2 in copper compression length, 5.12 in shear bolt connector length
1090 psi tensile strength
610% elongation
370 V/mil dielectric strength