Crouse-Hinds Condulet® FS2 FS Series 1-Outlet Shallow Device Box With Mounting Lug and Ground Screw, 3/4 in NPT Trade, 1 Gangs, Feraloy® Iron Alloy, Electro-Galvanized
FS_2
MFG #: FS2
Requires Quote
Non-Stock Item
- Country of Origin: US
- Dimensions: 5-5/32 in H x 2-3/4 in W x 1-7/8 in D
- Finish: Electro-Galvanized
- Manufacturer Name: Eaton
- Material: Feraloy® Iron Alloy
- Mounting Type: Flush
- Number of Gangs: 1
- Series: FS Series
- Suitable For Use With: IMC/Rigid Conduit
- Trade Size: 3/4 in NPT
- Type: 1-Outlet Shallow
Conduit device boxes for installation in non-hazardous area conduit systems to accommodate wiring devices, act as pull boxes or provide openings for taps and splices. Available in two box depths with a wide variety of hub configurations and sizes.
- Includes
- Standards
- Item Features
- Application
Mounting Lugs
UL 514|CSA C22.2 No. 18|Federal Specification W-C-5860
- Internal green grounding screw - standard
- Suitable for use in wet locations when used with gasketed covers
- Mounting lugs standard on most boxes
- Tapered threaded hubs (NPT) with integral bushing
- Available for surface mounting (with mounting lugs) or flush mounting (without mounting lugs) as listed
- Available as shallow (FS) or deep (FD) configuration
- Ample wiring room provided in either FS or FD configuration
- Wide selection of surface or flush covers available in three materials
- Covers for flush mounting extend to conceal the rough plaster line
- Available in single gang and multi-gang configurations with hubs and as blank bodies for drilled and tapped openings
- (1) end cable entry
- Accommodate wiring devices
- Act as pull boxes for conductors in a conduit system
- Provide openings to make splices and taps in conductors
- Provide access to conductors for maintenance and future system changes
- Connect conduit sections
For providing openings to make splices and taps in conductors