Crouse-Hinds

Crouse-Hinds Condulet® EYD116 Dust-Ignitionproof Explosionproof Conduit Sealing Fitting With Drain, 1/2 in FNPT, For Use With Vertical Position EYD Conduit System, Feraloy Iron Alloy/Ductile Iron, Electro-Galvanized/Aluminum Acrylic Painted

EYD116 MFG #: EYD116
$589.40 / EA
Non-Stock Item
Crouse-Hinds Condulet® EYD116 Dust-Ignitionproof Explosionproof Conduit Sealing Fitting With Drain, 1/2 in FNPT, For Use With Vertical Position EYD Conduit System, Feraloy Iron Alloy/Ductile Iron, Electro-Galvanized/Aluminum Acrylic Painted
  • Country of Origin: US
  • Dimensions: 3-9/32 in L x 1-1/4 in W
  • Finish: Electro-Galvanized/Aluminum Acrylic Painted
  • Manufacturer Name: Eaton
  • Material: Feraloy Iron Alloy/Ductile Iron
  • Mounting Type: Surface
  • Series: EYD
  • Size: 1/2 in FNPT
  • Suitable For Use With: Vertical Position EYD Conduit System
  • Type: Dust-Ignitionproof Explosionproof
In addition to restricting the passage of gases, vapors or flames from one portion of the electrical installation to another, Crouse-Hinds series EYD and EZD drain sealing fittings prevent accumulation of condensate above the seal. They are installed in vertical conduit runs and at low points in conduit systems.
QTY
Add to List
  • Item Features
  • Application
  • Standards
  • Drain to provide continuous, automatic drainage of condensate
  • Large openings with threaded closures to provide easy access to conduit hubs for making dams
  • Integral bushings to protect conductor insulation from damage
  • Taper tapped hubs to ensure ground continuity
  • Restrict the passage of gases, vapors or flames from one portion of the electrical installation to another at atmospheric pressure and normal ambient temperatures
  • Limit explosions to the sealed-off enclosure
  • Prevent pre-compression or pressure piling
  • Drain sealing fitting are installed in vertical conduit run and at low points in conduit system to prevent accumulation of condensate above seal
  • Stainless steel drain, steel removable nipples, Feraloy iron alloy and/or steel small closure plug, copper-free aluminum or ductile iron closure for drain
  • 1-5/8 in turning radius
Industrial Facilities, Factories and Other Applications
Class I, Division 1, 2, Groups B/C/D/Class II, Division 1, Groups E/F/G/Class II, Division 2, Groups F/G/Class III|CSA C22 File No .2|UL File No. 1203|UL File No. 886