Sandvik

Sandvik Coromant 6259439 CoroMill® Plura Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 4 in OAL, PVD Coated

26259439 MFG #: 6259439
$310.90 / EA
Non-Stock Item
Sandvik Coromant 6259439 CoroMill® Plura Ball Nose End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 4 in OAL, PVD Coated
  • ANSI Code: 1B231-1270-XA 1620
  • Country of Origin: SE
  • Cutter Diameter: 1/2 in
  • Cutting Direction: Right Hand
  • Finish: PVD Coated
  • Helix Angle: 30 deg
  • ISO Code: 1B231-1270-XA 1620
  • Length of Cut: 1 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 4 in
  • Series: CoroMill® Plura
  • Shank Diameter: 1/2 in
  • Shank Type: Cylindrical
  • Type: Ball Nose
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 1/2 in Diameter Cutter, 4 in Overall Length, 1 in Length of Cut, 2 Flutes, 1/2 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 1B231-1270-XA 1620, ISO Code: 1B231-1270-XA 1620, Solid Carbide, PVD Coated,
QTY
Add to List
  • Application
  • Item Features
Pre-Machining and Finishing
  • 1620 manufacturer grade
  • Cylindrical shank without clamping machine side adaptive interface
  • Straight chip breaker
  • 6.35 mm Dia core at face
  • 3 cutting length
  • Without coolant entry
  • No coolant exit
  • SFW (EFW) feed direction
  • Right hand helix flute
  • 10.5 deg radial rake
  • 1.5 deg axial rake
  • 25.4 mm L usable
  • 4 maximum regrinds
  • 56.3 mm overhang
  • 0 deg lead
  • 6.35 mm corner radius
  • 15 deg ramping
  • 80000 r/min
  • H9 diameter tolerance class cutting
  • 20 life cycle state