Sandvik

Sandvik Coromant 6259467 CoroMill® Plura Ball Nose End Mill, 0.157 in Dia Cutter, 0.433 in Length of Cut, 4 Flutes, 0.236 in Dia Shank, 3.149 in OAL, PVD Coated

26259467 MFG #: 6259467
$156.67 / EA
Non-Stock Item
Sandvik Coromant 6259467 CoroMill® Plura Ball Nose End Mill, 0.157 in Dia Cutter, 0.433 in Length of Cut, 4 Flutes, 0.236 in Dia Shank, 3.149 in OAL, PVD Coated
  • ANSI Code: 1B240-0400-XA 1630
  • Country of Origin: IT
  • Cutter Diameter: 0.157 in
  • Cutting Direction: Right Hand
  • Finish: PVD Coated
  • Helix Angle: 30 deg
  • ISO Code: 1B240-0400-XA 1630
  • Length of Cut: 0.433 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 4
  • Overall Length: 3.149 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.236 in
  • Shank Type: Cylindrical
  • Type: Ball Nose
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 0.157 in Diameter Cutter, 3.149 in Overall Length, 0.433 in Length of Cut, 4 Flutes, 0.236 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 1B240-0400-XA 1630, ISO Code: 1B240-0400-XA 1630, Solid Carbide, PVD Coated,
QTY
Add to List
  • Item Features
  • Application
  • Standards
  • 1630 manufacturer grade
  • 4 face effective cutt edge
  • Straight chip breaker
  • 2.4 mm Dia core at face
  • 4 cutting length
  • Without coolant entry
  • No coolant exit
  • SFW (EFW) feed direction
  • Right hand helix flute
  • 10.5 deg radial rake
  • 1.5 deg axial rake
  • 11 mm L usable
  • 44 mm overhang
  • 0 deg lead
  • 2 mm corner radius
  • 15 deg ramping
  • 80000 r/min
  • H7 diameter tolerance class cutting
  • 20 life cycle state
  • Optimized grades for all materials and conditions
Pre-Machining and Finishing
DIN1835-A|DIN6535-HA