Sandvik

Sandvik Coromant 6259972 CoroMill® Plura Ball Nose End Mill, 0.314 in Dia Cutter, 0.629 in Length of Cut, 2 Flutes, 0.314 in Dia Shank, 2.48 in OAL, Diamond Coated

26259972 MFG #: 6259972
$505.27 / EA
Non-Stock Item
Sandvik Coromant 6259972 CoroMill® Plura Ball Nose End Mill, 0.314 in Dia Cutter, 0.629 in Length of Cut, 2 Flutes, 0.314 in Dia Shank, 2.48 in OAL, Diamond Coated
  • ANSI Code: 2B230-0800-NA N20C
  • Country of Origin: IT
  • Cutter Diameter: 0.314 in
  • Cutting Direction: Right Hand
  • Finish: Diamond Coated
  • Helix Angle: 30 deg
  • ISO Code: 2B230-0800-NA N20C
  • Length of Cut: 0.629 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 2.48 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.314 in
  • Shank Type: Cylindrical
  • Type: Ball Nose
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 0.314 in Diameter Cutter, 2.48 in Overall Length, 0.629 in Length of Cut, 2 Flutes, 0.314 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 2B230-0800-NA N20C, ISO Code: 2B230-0800-NA N20C, Solid Carbide, Diamond Coated,
QTY
Add to List
  • Application
  • Standards
  • Item Features
Pre-Machining and Finishing
DIN1835-A|DIN6535-HA
  • N20C manufacturer grade
  • 2 face effective cutt edge
  • Straight chip breaker
  • 4 mm Dia core at face
  • 3 cutting length
  • Without coolant entry
  • No coolant exit
  • SFW (EFW) feed direction
  • Right hand helix flute
  • 10.5 deg radial rake
  • 1.5 deg axial rake
  • 16 mm L usable
  • 2 maximum regrinds
  • 27 mm overhang
  • 0 deg lead
  • 4 mm corner radius
  • 15 deg ramping
  • 80000 r/min
  • H9 diameter tolerance class cutting
  • 20 life cycle state