Sandvik

Sandvik Coromant 6259973 CoroMill® Plura Ball Nose End Mill, 0.157 in Dia Cutter, 0.275 in Length of Cut, 1 Flutes, 0.157 in Dia Shank, 1.968 in OAL, Uncoated

26259973 MFG #: 6259973
$233.54 / EA
Non-Stock Item
Sandvik Coromant 6259973 CoroMill® Plura Ball Nose End Mill, 0.157 in Dia Cutter, 0.275 in Length of Cut, 1 Flutes, 0.157 in Dia Shank, 1.968 in OAL, Uncoated
  • ANSI Code: 2B330-0400-NC H10F
  • Country of Origin: SE
  • Cutter Diameter: 0.157 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 40 deg
  • ISO Code: 2B330-0400-NC H10F
  • Length of Cut: 0.275 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 1
  • Overall Length: 1.968 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.157 in
  • Shank Type: Cylindrical
  • Type: Ball Nose
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 0.157 in Diameter Cutter, 1.968 in Overall Length, 0.275 in Length of Cut, 1 Flutes, 0.157 in Shank Diameter, Right Hand Cutting Direction, 40 deg Helix Angle, Cylindrical Shank, ANSI Code: 2B330-0400-NC H10F, ISO Code: 2B330-0400-NC H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Standards
  • Item Features
  • Application
DIN1835-A|DIN6535-HA
  • H10F manufacturer grade
  • 1 face effective cutt edge
  • 3.7 mm Dia body
  • 0 deg body half taper
  • Straight chip breaker
  • 1.8 mm Dia core at face
  • 11.8 mm L body
  • 3 cutting length
  • Without coolant entry
  • No coolant exit
  • 3.7 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 17 deg radial rake
  • 1.5 deg axial rake
  • 11.8 mm L usable
  • 22 mm overhang
  • 0 deg lead
  • 2 mm corner radius
  • 20 deg ramping
Pre-Machining and Finishing