Sandvik

Sandvik Coromant 6259976 CoroMill® Plura Ball Nose End Mill, 0.314 in Dia Cutter, 0.551 in Length of Cut, 1 Flutes, 0.314 in Dia Shank, 2.48 in OAL, Uncoated

26259976 MFG #: 6259976
$314.32 / EA
Non-Stock Item
Sandvik Coromant 6259976 CoroMill® Plura Ball Nose End Mill, 0.314 in Dia Cutter, 0.551 in Length of Cut, 1 Flutes, 0.314 in Dia Shank, 2.48 in OAL, Uncoated
  • ANSI Code: 2B330-0800-NC H10F
  • Country of Origin: SE
  • Cutter Diameter: 0.314 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 40 deg
  • ISO Code: 2B330-0800-NC H10F
  • Length of Cut: 0.551 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 1
  • Overall Length: 2.48 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.314 in
  • Shank Type: Cylindrical
  • Type: Ball Nose
Sandvik Coromant End Mill, Ball Nose, Series: CoroMill® Plura, 0.314 in Diameter Cutter, 2.48 in Overall Length, 0.551 in Length of Cut, 1 Flutes, 0.314 in Shank Diameter, Right Hand Cutting Direction, 40 deg Helix Angle, Cylindrical Shank, ANSI Code: 2B330-0800-NC H10F, ISO Code: 2B330-0800-NC H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Standards
  • Application
  • Item Features
DIN1835-A|DIN6535-HA
Pre-Machining and Finishing
  • H10F manufacturer grade
  • 1 face effective cutt edge
  • 7.7 mm Dia body
  • 0 - 30 deg body half taper
  • Straight chip breaker
  • 3.2 mm Dia core at face
  • 23.8 mm L body
  • 3 cutting length
  • Without coolant entry
  • No coolant exit
  • 7.7 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 17 deg radial rake
  • 1.5 deg axial rake
  • 23.8 mm L usable
  • 2 maximum regrinds
  • 27 mm overhang
  • 0 deg lead
  • 4 mm corner radius