Sandvik

Sandvik Coromant 6259636 CoroMill® Plura Square Shoulder End Mill, 0.078 in Dia Cutter, 0.255 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 2.244 in OAL, PVD Coated

26259636 MFG #: 6259636
$103.31 / EA
Non-Stock Item
Sandvik Coromant 6259636 CoroMill® Plura Square Shoulder End Mill, 0.078 in Dia Cutter, 0.255 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 2.244 in OAL, PVD Coated
  • ANSI Code: 1P230-0200-XA 1630
  • Country of Origin: IT
  • Cutter Diameter: 0.078 in
  • Cutting Direction: Right Hand
  • Finish: PVD Coated
  • Helix Angle: 30 deg
  • ISO Code: 1P230-0200-XA 1630
  • Length of Cut: 0.255 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 2.244 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.236 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.078 in Cutter Dia, 2.244 in Overall Length, 0.255 in Length of Cut, 2 Flutes, 0.236 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 1P230-0200-XA 1630, ISO Code: 1P230-0200-XA 1630, Solid Carbide, PVD Coated,
QTY
Add to List
  • Item Features
  • Standards
  • 1630 manufacturer grade
  • 1 mm maximum working engagement
  • 1 maximum working engagement ratio
  • 2 mm Dia body
  • 0 - 30 deg body half taper
  • Center cutting capability
  • 1.12 mm Dia core at face
  • 9.7 mm L body
  • 3 cutting length
  • Without coolant entry
  • No coolant exit
  • 2 mm Dia cutting face contact
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 9 deg radial rake
  • 5.5 deg axial rake
  • 6 mm L usable
  • 21 mm overhang
  • 90 deg y-axis rot
  • 9 deg ramping
DIN1835-A|DIN6535-HA