Sandvik

Sandvik Coromant 6259984 CoroMill® Plura Square Shoulder End Mill, 0.787 in Dia Cutter, 0.787 in Length of Cut, 2 Flutes, 0.787 in Dia Shank, 4.921 in OAL, Uncoated

26259984 MFG #: 6259984
$1,111.88 / EA
Non-Stock Item
Sandvik Coromant 6259984 CoroMill® Plura Square Shoulder End Mill, 0.787 in Dia Cutter, 0.787 in Length of Cut, 2 Flutes, 0.787 in Dia Shank, 4.921 in OAL, Uncoated
  • ANSI Code: 2P120-2000-NC H10F
  • Country of Origin: IT
  • Cutter Diameter: 0.787 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 25 deg
  • ISO Code: 2P120-2000-NC H10F
  • Length of Cut: 0.787 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 4.921 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.787 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.787 in Diameter Cutter, 4.921 in Overall Length, 0.787 in Length of Cut, 2 Flutes, 0.787 in Shank Diameter, Right Hand Cutting Direction, 25 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P120-2000-NC H10F, ISO Code: 2P120-2000-NC H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Item Features
  • Standards
  • H10F manufacturer grade
  • 1 mm maximum working engagement
  • 1 maximum working engagement ratio
  • AL chip breaker
  • Center cutting capability
  • 8 mm Dia core at face
  • 0.15 mm W corner chamfer
  • M cutting length
  • Without coolant entry
  • No coolant exit
  • 19.7 mm Dia cutting face contact
  • 19 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 13.5 deg radial rake
  • 13.5 deg axial rake
  • 70 mm L usable
  • 4 maximum regrinds
  • 75 mm overhang
  • 90 deg y-axis rot
DIN1835-A|DIN6535-HA