Sandvik Coromant 6259994 CoroMill® Plura Square Shoulder End Mill, 0.629 in Dia Cutter, 0.944 in Length of Cut, 2 Flutes, 0.629 in Dia Shank, 3.622 in OAL, Uncoated
26259994
MFG #: 6259994
$812.25
/ EA
Non-Stock Item
- ANSI Code: 2P121-1600-NC H10F
- Country of Origin: IT
- Cutter Diameter: 0.629 in
- Cutting Direction: Right Hand
- Finish: Uncoated
- Helix Angle: 25 deg
- ISO Code: 2P121-1600-NC H10F
- Length of Cut: 0.944 in
- Manufacturer Name: Sandvik Coromant
- Material: Solid Carbide
- Number of Flutes: 2
- Overall Length: 3.622 in
- Series: CoroMill® Plura
- Shank Diameter: 0.629 in
- Shank Type: Cylindrical
- Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.629 in Diameter Cutter, 3.622 in Overall Length, 0.944 in Length of Cut, 2 Flutes, 0.629 in Shank Diameter, Right Hand Cutting Direction, 25 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P121-1600-NC H10F, ISO Code: 2P121-1600-NC H10F, Solid Carbide, Uncoated,
- Item Features
- Standards
- H10F manufacturer grade
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- 30 deg body half taper
- AL chip breaker
- Center cutting capability
- 7 mm Dia core at face
- 2 cutting length
- Without coolant entry
- No coolant exit
- 15.7 mm Dia cutting face contact
- 15.7 mm Dia neck
- SFW (EFW) feed direction
- Right helix flute hand
- 17 deg radial rake
- 1 deg axial rake
- 48 mm L usable
- 4 maximum regrinds
- 44 mm overhang
- 0.15 mm corner radius
DIN1835-A|DIN6535-HA