Sandvik

Sandvik Coromant 6260003 CoroMill® Plura Square Shoulder End Mill, 0.787 in Dia Cutter, 1.181 in Length of Cut, 2 Flutes, 0.787 in Dia Shank, 5.905 in OAL, Uncoated

26260003 MFG #: 6260003
$1,530.49 / EA
Non-Stock Item
Sandvik Coromant 6260003 CoroMill® Plura Square Shoulder End Mill, 0.787 in Dia Cutter, 1.181 in Length of Cut, 2 Flutes, 0.787 in Dia Shank, 5.905 in OAL, Uncoated
  • ANSI Code: 2P122-2000-NC H10F
  • Country of Origin: SE
  • Cutter Diameter: 0.787 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 25 deg
  • ISO Code: 2P122-2000-NC H10F
  • Length of Cut: 1.181 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 5.905 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.787 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.787 in Cutter Dia, 5.905 in Overall Length, 1.181 in Length of Cut, 2 Flutes, 0.787 in Shank Dia, Right Hand Cutting, 25 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P122-2000-NC H10F, ISO Code: 2P122-2000-NC H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Standards
  • Item Features
DIN1835-A|DIN6535-HA
  • H10F manufacturer grade
  • 1 mm maximum working engagement
  • 1 maximum working engagement ratio
  • 30 deg body half taper
  • AL chip breaker
  • Center cutting capability
  • 10 mm Dia core at face
  • 2 cutting length
  • Without coolant entry
  • No coolant exit
  • 19.7 mm Dia cutting face contact
  • 19 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 17 deg radial rake
  • 1 deg axial rake
  • 80 mm L usable
  • 4 maximum regrinds
  • 100 mm overhang
  • 0.15 mm corner radius