Sandvik Coromant 6260009 CoroMill® Plura Square Shoulder End Mill, 0.393 in Dia Cutter, 0.59 in Length of Cut, 2 Flutes, 0.393 in Dia Shank, 3.503 in OAL, Uncoated
26260009
MFG #: 6260009
$403.92
/ EA
Non-Stock Item
- ANSI Code: 2P122-1000-NC H10F
- Country of Origin: IT
- Cutter Diameter: 0.393 in
- Cutting Direction: Right Hand
- Finish: Uncoated
- Helix Angle: 25 deg
- ISO Code: 2P122-1000-NC H10F
- Length of Cut: 0.59 in
- Manufacturer Name: Sandvik Coromant
- Material: Solid Carbide
- Number of Flutes: 2
- Overall Length: 3.503 in
- Series: CoroMill® Plura
- Shank Diameter: 0.393 in
- Shank Type: Cylindrical
- Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.393 in Cutter Dia, 3.503 in Overall Length, 0.59 in Length of Cut, 2 Flutes, 0.393 in Shank Dia, Right Hand Cutting, 25 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P122-1000-NC H10F, ISO Code: 2P122-1000-NC H10F, Solid Carbide, Uncoated,
- Item Features
- Standards
- H10F manufacturer grade
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- 30 deg body half taper
- AL chip breaker
- Center cutting capability
- 4.3 mm Dia core at face
- 2 cutting length
- Without coolant entry
- No coolant exit
- 9.7 mm Dia cutting face contact
- 9.2 mm Dia neck
- SFW (EFW) feed direction
- Right helix flute hand
- 17 deg radial rake
- 1 deg axial rake
- 40 mm L usable
- 2 maximum regrinds
- 49 mm overhang
- 0.15 mm corner radius
DIN1835-A|DIN6535-HA