Sandvik Coromant 6260020 CoroMill® Plura Square Shoulder End Mill, 0.196 in Dia Cutter, 0.314 in Length of Cut, 2 Flutes, 0.188 in Dia Shank, 2.755 in OAL, Uncoated
26260020
MFG #: 6260020
$246.76
/ EA
Non-Stock Item
- ANSI Code: 2P123-0500-NG H10F
- Country of Origin: IT
- Cutter Diameter: 0.196 in
- Cutting Direction: Right Hand
- Finish: Uncoated
- Helix Angle: 25 deg
- ISO Code: 2P123-0500-NG H10F
- Length of Cut: 0.314 in
- Manufacturer Name: Sandvik Coromant
- Material: Solid Carbide
- Number of Flutes: 2
- Overall Length: 2.755 in
- Series: CoroMill® Plura
- Shank Diameter: 0.188 in
- Shank Type: Cylindrical
- Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.196 in Diameter Cutter, 2.755 in Overall Length, 0.314 in Length of Cut, 2 Flutes, 0.188 in Shank Diameter, Right Hand Cutting Direction, 25 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P123-0500-NG H10F, ISO Code: 2P123-0500-NG H10F, Solid Carbide, Uncoated,
- Item Features
- H10F manufacturer grade
- Cylindrical shank without clamping machine side adaptive interface
- 1 mm maximum working engagement
- 1 maximum working engagement ratio
- AL chip breaker
- Center cutting capability
- 2.2 mm Dia core at face
- 2 cutting length
- Without coolant entry
- No coolant exit
- 4.7 mm Dia cutting face contact
- SFW (EFW) feed direction
- Right helix flute hand
- 17 deg radial rake
- 1 deg axial rake
- 42 mm L usable
- 42 mm overhang
- 0.15 mm corner radius
- 90 deg y-axis rot
- 15 deg ramping