Sandvik

Sandvik Coromant 6260043 CoroMill® Plura Square Shoulder End Mill, 0.314 in Dia Cutter, 1.259 in Length of Cut, 2 Flutes, 0.314 in Dia Shank, 3.11 in OAL, Uncoated

26260043 MFG #: 6260043
$274.67 / EA
Non-Stock Item
Sandvik Coromant 6260043 CoroMill® Plura Square Shoulder End Mill, 0.314 in Dia Cutter, 1.259 in Length of Cut, 2 Flutes, 0.314 in Dia Shank, 3.11 in OAL, Uncoated
  • ANSI Code: 2P170-0800-NA H10F
  • Country of Origin: IT
  • Cutter Diameter: 0.314 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 25 deg
  • ISO Code: 2P170-0800-NA H10F
  • Length of Cut: 1.259 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 3.11 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.314 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.314 in Diameter Cutter, 3.11 in Overall Length, 1.259 in Length of Cut, 2 Flutes, 0.314 in Shank Diameter, Right Hand Cutting Direction, 25 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P170-0800-NA H10F, ISO Code: 2P170-0800-NA H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Item Features
  • Standards
  • H10F manufacturer grade
  • 1 mm maximum working engagement
  • 0.5 maximum working engagement ratio
  • AL chip breaker
  • Center cutting capability
  • 3.2 mm Dia core at face
  • 7 cutting length
  • Without coolant entry
  • No coolant exit
  • 7.7 mm Dia cutting face contact
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 17 deg radial rake
  • 1 deg axial rake
  • 32 mm L usable
  • 2 maximum regrinds
  • 43 mm overhang
  • 0.15 mm corner radius
  • 90 deg y-axis rot
  • 15 deg ramping
DIN1835-A|DIN6535-HA