Sandvik

Sandvik Coromant 6260051 CoroMill® Plura Square Shoulder End Mill, 0.118 in Dia Cutter, 0.118 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 3.149 in OAL, Diamond Coated

26260051 MFG #: 6260051
$493.52 / EA
Non-Stock Item
Sandvik Coromant 6260051 CoroMill® Plura Square Shoulder End Mill, 0.118 in Dia Cutter, 0.118 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 3.149 in OAL, Diamond Coated
  • ANSI Code: 2P210-0300-NC N20C
  • Country of Origin: IT
  • Cutter Diameter: 0.118 in
  • Cutting Direction: Right Hand
  • Finish: Diamond Coated
  • Helix Angle: 30 deg
  • ISO Code: 2P210-0300-NC N20C
  • Length of Cut: 0.118 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 3.149 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.236 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.118 in Cutter Dia, 3.149 in Overall Length, 0.118 in Length of Cut, 2 Flutes, 0.236 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P210-0300-NC N20C, ISO Code: 2P210-0300-NC N20C, Solid Carbide, Diamond Coated,
QTY
Add to List
  • Item Features
  • Standards
  • N20C manufacturer grade
  • 1 mm maximum working engagement
  • 1 maximum working engagement ratio
  • 3 mm Dia body
  • 0.4 - 10 deg body half taper
  • Center cutting capability
  • 1.5 mm Dia core at face
  • 30 mm L body
  • 1 cutting length
  • Without coolant entry
  • No coolant exit
  • 3 mm Dia cutting face contact
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 1.5 deg radial rake
  • 1.5 deg axial rake
  • 3 mm L usable
  • 44 mm overhang
  • 90 deg y-axis rot
  • 10 deg ramping
DIN1835-A|DIN6535-HA