Sandvik

Sandvik Coromant 6260052 CoroMill® Plura Square Shoulder End Mill, 0.157 in Dia Cutter, 0.157 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 3.937 in OAL, Diamond Coated

26260052 MFG #: 6260052
$493.52 / EA
Non-Stock Item
Sandvik Coromant 6260052 CoroMill® Plura Square Shoulder End Mill, 0.157 in Dia Cutter, 0.157 in Length of Cut, 2 Flutes, 0.236 in Dia Shank, 3.937 in OAL, Diamond Coated
  • ANSI Code: 2P210-0400-NC N20C
  • Country of Origin: SE
  • Cutter Diameter: 0.157 in
  • Cutting Direction: Right Hand
  • Finish: Diamond Coated
  • Helix Angle: 30 deg
  • ISO Code: 2P210-0400-NC N20C
  • Length of Cut: 0.157 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 3.937 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.236 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.157 in Cutter Dia, 3.937 in Overall Length, 0.157 in Length of Cut, 2 Flutes, 0.236 in Shank Dia, Right Hand Cutting, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P210-0400-NC N20C, ISO Code: 2P210-0400-NC N20C, Solid Carbide, Diamond Coated,
QTY
Add to List
  • Item Features
  • Standards
  • N20C manufacturer grade
  • 1 mm maximum working engagement
  • 1 maximum working engagement ratio
  • 3.8 mm Dia body
  • 0 - 30 deg body half taper
  • Center cutting capability
  • 2 mm Dia core at face
  • 40 mm L body
  • 1 cutting length
  • Without coolant entry
  • No coolant exit
  • 4 mm Dia cutting face contact
  • 3.8 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 1.5 deg radial rake
  • 1.5 deg axial rake
  • 40 mm L usable
  • 64 mm overhang
  • 90 deg y-axis rot
DIN1835-A|DIN6535-HA