Sandvik

Sandvik Coromant 6260141 CoroMill® Plura Square Shoulder End Mill, 0.787 in Dia Cutter, 2.755 in Length of Cut, 4 Flutes, 0.787 in Dia Shank, 6.102 in OAL, PVD Coated

26260141 MFG #: 6260141
$1,385.08 / EA
Non-Stock Item
Sandvik Coromant 6260141 CoroMill® Plura Square Shoulder End Mill, 0.787 in Dia Cutter, 2.755 in Length of Cut, 4 Flutes, 0.787 in Dia Shank, 6.102 in OAL, PVD Coated
  • ANSI Code: 2P360-2000-PA 1630
  • Country of Origin: IT
  • Cutter Diameter: 0.787 in
  • Cutting Direction: Right Hand
  • Finish: PVD Coated
  • Helix Angle: 37 deg
  • ISO Code: 2P360-2000-PA 1630
  • Length of Cut: 2.755 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 4
  • Overall Length: 6.102 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.787 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.787 in Cutter Dia, 6.102 in Overall Length, 2.755 in Length of Cut, 4 Flutes, 0.787 in Shank Dia, Right Hand Cutting, 37 deg Helix Angle, Cylindrical Shank, ANSI Code: 2P360-2000-PA 1630, ISO Code: 2P360-2000-PA 1630, Solid Carbide, PVD Coated,
QTY
Add to List
  • Standards
  • Item Features
DIN1835-A|DIN6535-HA
  • 1630 manufacturer grade
  • 1.5 mm maximum working engagement
  • 0.75 maximum working engagement ratio
  • Center cutting capability
  • 14.4 mm Dia core at face
  • 0.2 mm W corner chamfer
  • 6 cutting length
  • Without coolant entry
  • No coolant exit
  • 19.6 mm Dia cutting face contact
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 10 deg radial rake
  • 7.5 deg axial rake
  • 70 mm L usable
  • 4 maximum regrinds
  • 107 mm overhang
  • 90 deg y-axis rot
  • 5 deg ramping
  • 7400 r/min