Sandvik

Sandvik Coromant 6260146 CoroMill® Plura Square Shoulder End Mill, 0.629 in Dia Cutter, 0.944 in Length of Cut, 2 Flutes, 0.629 in Dia Shank, 3.622 in OAL, Uncoated

26260146 MFG #: 6260146
$872.47 / EA
Non-Stock Item
Sandvik Coromant 6260146 CoroMill® Plura Square Shoulder End Mill, 0.629 in Dia Cutter, 0.944 in Length of Cut, 2 Flutes, 0.629 in Dia Shank, 3.622 in OAL, Uncoated
  • ANSI Code: 2S220-1600-200-NC H10F
  • Country of Origin: IT
  • Cutter Diameter: 0.629 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 30 deg
  • ISO Code: 2S220-1600-200-NC H10F
  • Length of Cut: 0.944 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 3.622 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.629 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.629 in Diameter Cutter, 3.622 in Overall Length, 0.944 in Length of Cut, 2 Flutes, 0.629 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 2S220-1600-200-NC H10F, ISO Code: 2S220-1600-200-NC H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Item Features
  • Standards
  • H10F manufacturer grade
  • 1 mm maximum working engagement
  • 1 maximum working engagement ratio
  • 30 deg body half taper
  • AL chip breaker
  • Center cutting capability
  • 7 mm Dia core at face
  • 2 cutting length
  • Without coolant entry
  • No coolant exit
  • 12 mm Dia cutting face contact
  • 15.7 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 17 deg radial rake
  • 1 deg axial rake
  • 47 mm L usable
  • 4 maximum regrinds
  • 44 mm overhang
  • 2 mm corner radius
DIN1835-A|DIN6535-HA