Sandvik

Sandvik Coromant 6261157 CoroMill® Plura Square Shoulder End Mill, 0.629 in Dia Cutter, 0.905 in Length of Cut, 2 Flutes, 0.618 in Dia Shank, 4.921 in OAL, Uncoated

26261157 MFG #: 6261157
$872.47 / EA
Non-Stock Item
Sandvik Coromant 6261157 CoroMill® Plura Square Shoulder End Mill, 0.629 in Dia Cutter, 0.905 in Length of Cut, 2 Flutes, 0.618 in Dia Shank, 4.921 in OAL, Uncoated
  • ANSI Code: 2S221-1600-200-NG H10F
  • Country of Origin: SE
  • Cutter Diameter: 0.629 in
  • Cutting Direction: Right Hand
  • Finish: Uncoated
  • Helix Angle: 30 deg
  • ISO Code: 2S221-1600-200-NG H10F
  • Length of Cut: 0.905 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 2
  • Overall Length: 4.921 in
  • Series: CoroMill® Plura
  • Shank Diameter: 0.618 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 0.629 in Diameter Cutter, 4.921 in Overall Length, 0.905 in Length of Cut, 2 Flutes, 0.618 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Cylindrical Shank, ANSI Code: 2S221-1600-200-NG H10F, ISO Code: 2S221-1600-200-NG H10F, Solid Carbide, Uncoated,
QTY
Add to List
  • Item Features
  • H10F manufacturer grade
  • Cylindrical shank without clamping machine side adaptive interface
  • 1.6 mm maximum working engagement
  • 1 maximum working engagement ratio
  • AL chip breaker
  • Center cutting capability
  • 7 mm Dia core at face
  • 2 cutting length
  • Without coolant entry
  • No coolant exit
  • 12 mm Dia cutting face contact
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 17 deg radial rake
  • 1 deg axial rake
  • 77 mm L usable
  • 3 maximum regrinds
  • 77 mm overhang
  • 2 mm corner radius
  • 90 deg y-axis rot