Sandvik

Sandvik Coromant 6732508 CoroMill® Plura Square Shoulder End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, PVD Coated

26732508 MFG #: 6732508
$215.04 / EA
Non-Stock Item
Sandvik Coromant 6732508 CoroMill® Plura Square Shoulder End Mill, 1/4 in Dia Cutter, 5/8 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 2-1/2 in OAL, PVD Coated
  • ANSI Code: 2N342-0635-PC 1730
  • Country of Origin: SE
  • Cutter Diameter: 1/4 in
  • Cutting Direction: Right Hand
  • Finish: PVD Coated
  • Helix Angle: 38 deg
  • ISO Code: 2N342-0635-PC 1730
  • Length of Cut: 5/8 in
  • Manufacturer Name: Sandvik Coromant
  • Material: Solid Carbide
  • Number of Flutes: 5
  • Overall Length: 2-1/2 in
  • Series: CoroMill® Plura
  • Shank Diameter: 1/4 in
  • Shank Type: Cylindrical
  • Type: Square
Sandvik Coromant Shoulder End Mill, Square, Series: CoroMill® Plura, 1/4 in Diameter Cutter, 2-1/2 in Overall Length, 5/8 in Length of Cut, 5 Flutes, 1/4 in Shank Diameter, Right Hand Cutting Direction, 38 deg Helix Angle, Cylindrical Shank, ANSI Code: 2N342-0635-PC 1730, ISO Code: 2N342-0635-PC 1730, Solid Carbide, PVD Coated,
QTY
Add to List
  • Item Features
  • 1730 manufacturer grade
  • Cylindrical shank without clamping machine side adaptive interface
  • 1.5 mm maximum working engagement
  • 1 maximum working engagement ratio
  • 6.02 mm Dia body
  • 0 - 30 deg body half taper
  • 3.81 mm Dia core at face
  • 23.8 mm L body
  • 0.102 mm W corner chamfer
  • Without coolant entry
  • Cutting pitch differential
  • No coolant exit
  • 6.146 mm Dia cutting face contact
  • 6.02 mm Dia neck
  • SFW (EFW) feed direction
  • Right helix flute hand
  • 10.5 deg radial rake
  • 10.5 deg axial rake
  • 23.8 mm L usable
  • 1 maximum regrinds