DeWALT® Powers® Wedge-Bolt™ 07880-PWR Heavy Duty Screw Anchor With Sacrificial Carbon Steel Drive Tip and Tapping Thread, 3/8 in Dia, 2-1/2 in OAL, Hex Washer Head Drive, 316 Stainless Steel, 2 in D Min Embedment
07880-PWR
MFG #: 07880-PWR
$7.76
/ EA
Non-Stock Item
- Applicable Materials: Normal Weight Concrete, Lightweight Concrete, Grouted Concrete Masonry and Brick Masonry
- Country of Origin: TW
- Diameter: 3/8 in
- Head Drive Type: Hex Washer
- Head Size: 21/64 in H
- Manufacturer Name: Stanley Black & Decker
- Material: 316 Stainless Steel
- Minimum Embedment Depth: 2 in
- Overall Length: 2-1/2 in
- Request For Quote: No
- Shear Strength: 3295 lb
- Tensile Strength: 1210 lb
- Thread Length: 2-1/4 in
- Type: Heavy Duty
The 316 stainless steel Wedge-Bolt™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head. It is simple to install, easy to identify, fully removable and vibration-resistant. The Wedge-Bolt™ has many unique features and benefits that make it well suited for many applications, both indoors and out. Optimum performance is obtained using a combination of patented design concepts. The steel threads along the anchor body self tap into the hole during installation and provide positive keyed engagement. The benefit to the designer is higher load capacities, while the benefit to the user is ease of installation. The Wedge-Bolt™ can be installed with either a powered impact wrench or conventional hand socket. 316 stainless steel Wedge-Bolt™ Screw Anchors are designed to be used with a matched tolerance Wedge-Bit™ for optimum performance. The Wedge-Bolt™ works in fixture clearance holes that are 1/16 in over nominal, which is typical of standard fixture holes used in steel fabrication. Note - not suitable for chloride/chlorine environments.
- Standards
- Item Features
- Application
ASTM E488|AC106|AC193
- High corrosion resistance of Type 316 stainless steel
- Anchor can be installed through standard fixture holes
- Can be installed with an impact wrench or conventional hand socket
- Finished hex head provides attractive appearance and minimizes tripping hazard
- Ratchet teeth on underside of hex washer head lock against the fixture
- Consistent performance in high and low strength concrete
- Diameter, length and identifying marking stamped on head of each anchor
- Fast installation and immediate loading minimizes downtime
- Can be installed closer to a free-edge than traditional expansion anchors
- Removable
- 316 stainless steel Wedge-Bolt™ has a blue marking and must be installed with a matched tolerance Wedge-Bit™
- Ultimate load capacity: 735 lb tensile strength when embedded in 2500 psi, 805 lb tensile strength when embedded in 3000 psi, 930 lb tensile strength when embedded in 4000 psi, 1180 lb tensile strength when embedded in 6000 psi and 1210 lb tensile strength when embedded in 8000 psi compressive strength concrete
- Ultimate load capacity - 735 lb tensile strength when embedded in 2500 psi, 805 lb tensile strength when embedded in 3000 psi, 930 lb tensile strength when embedded in 4000 psi, 1180 lb tensile strength when embedded in 6000 psi and 1210 lb tensile strength when embedded in 8000 psi normal-weight concrete
- Ultimate load capacity - 1675 lb shear strength when embedded in 2500 psi, 1833 lb shear strength when embedded in 3000 psi, 2115 lb shear strength when embedded in 4000 psi, 2710 lb shear strength when embedded in 6000 psi and 3295 lb shear strength when embedded in 8000 psi normal-weight concrete
- Allowable load capacity - 185 lb tensile strength when embedded in 2500 psi, 200 lb tensile strength when embedded in 3000 psi, 235 lb tensile strength when embedded in 4000 psi, 295 lb tensile strength when embedded in 6000 psi and 305 lb tensile strength when embedded in 8000 psi normal-weight concrete
- Allowable load capacity - 420 lb shear strength when embedded in 2500 psi, 460 lb shear strength when embedded in 3000 psi, 530 lb shear strength when embedded in 4000 psi, 680 lb shear strength when embedded in 6000 psi and 825 lb shear strength when embedded in 8000 psi normal-weight concrete
- Ultimate load capacity - 1535 lb tensile strength when embedded in 1500 psi, 1775 lb tensile strength when embedded in 2000 psi at 3-3/4 in minimum edge distance and 1-1/2 in minimum end distance grout-filled concrete masonry
- Ultimate load capacity - 775 lb shear strength when embedded in 1500 psi, 895 lb shear strength when embedded in 2000 psi at 3-3/4 in minimum edge distance and 1-1/2 in minimum end distance grout-filled concrete masonry
- Allowable load capacity - 305 lb tensile strength when embedded in 1500 psi, 355 lb tensile strength when embedded in 2000 psi at 3-3/4 in minimum edge distance and 1-1/2 in minimum end distance grout-filled concrete masonry
- Allowable load capacity - 155 lb shear strength when embedded in 1500 psi, 180 lb shear strength when embedded in 2000 psi at 3-3/4 in minimum edge distance and 1-1/2 in minimum end distance grout-filled concrete masonry
Interior and Exterior Applications, Support Ledgers and Windows, Railing and Fencing, Storage Facilities, Maintenance, Repairs and Retrofit Applications