Martin

Martin B1060-3 Plain Bevel Gear, Bevel Gear, 10 Diametral Pitch, 20 deg Pressure Angle, 60 Teeth, 6 in Dia Pitch, 0.78 in W Face, 0.875 to 1.815 in Dia Bore, Cast Iron

B1060-3 MFG #: B1060-3
$345.49 / EA
Non-Stock Item
  • Bore Diameter: 0.875 to 1.815 in
  • Country of Origin: US
  • Diametral Pitch: 10
  • Face Width: 0.78 in
  • Gear Ratio: 3:1
  • Gear Type: Bevel
  • Hub Diameter: 3 in
  • Hub Projection: 1-3/8 in
  • Hub Type: No Screws
  • Manufacturer Name: Martin Sprocket & Gear
  • Material: Cast Iron
  • Number of Teeth: 60
  • Outside Diameter: 6.035 in
  • Overall Length: 1-29/32 in
  • Pitch Diameter: 6 in
  • Pressure Angle: 20 deg
  • Type: Plain
Bevel gears are used as right angle drives where high efficiency is required. They are carried in stock as 1:1 to 6:1 ratios. Bevel gears are cut with the long and short addendum system and 20 deg pressure angle to compensate for tooth undercut in gears and pinions having low numbers of teeth. Most all of Martin bevel gears are cut with the coniflex tooth form to allow for a slight misalignment at assembly and during operation. Gears should be mounted at the correct distance from the core of apex center with thrust bearings being used in back of hubs to absorb the backward thrust created in this type of gearing.
  • Item Features
  • Commercial Class Gear. AGMA 6-8
  • Right angle drives with varied ratios