Honeywell 123871A/U Well Assembly, For Use With Aquastat® Temperature Controller, Copper
226720
MFG #: 123871A/U
Requires Quote
Honeywell Well Assembly, For Use With: Aquastat® Temperature Controller, Copper
- Immersion wells and compression fittings are available to fit a 1/2-14 or 3/4-14 NPT tapping with a
- Immersion wells and compression fittings are available in a variety of lengths and dia
- Immersion wells and compression fittings are available in a variety of materials, to suit the applic
- Materials include - brass, copper, stainless steel, mild steel or monel
- Element holders support the capillary and bulb or an averaging element in duct applications
- Bulb shields protect the sensing bulb from sun and weather with the bulb installed outdoors
- Accessories, including mounting clips, heat conductive compounds, waste nuts, a pipe strap and a wel
- Immersion wells allow heat transfer while protecting the sensing bulb from contact with the controll
- Immersion wells permit removal of the sensing bulb for testing or replacement without draining the s
- Compression fittings seal the boiler and allow bulb insertion directly into the controlled medium
- 3 in L insertion, 3/8 in shell, 3 in D insulation
- 3/4-14 NPT well spud
Immersion wells and compression fittings are available to fit a 1/2-14 or 3/4-14 NPT tapping with a range of insulation depths
Immersion wells and compression fittings are available in a variety of lengths and dia
Immersion wells and compression fittings are available in a variety of materials, to suit the application
Materials include - brass, copper, stainless steel, mild steel or monel
Element holders support the capillary and bulb or an averaging element in duct applications
Bulb shields protect the sensing bulb from sun and weather with the bulb installed outdoors
Accessories, including mounting clips, heat conductive compounds, waste nuts, a pipe strap and a well adapter are available for mounting sensing bulbs in various applications
Immersion wells allow heat transfer while protecting the sensing bulb from contact with the controlled medium
Immersion wells permit removal of the sensing bulb for testing or replacement without draining the system
Compression fittings seal the boiler and allow bulb insertion directly into the controlled medium
3 in L insertion, 3/8 in shell, 3 in D insulation
3/4-14 NPT well spud