3M™ 7100006311 High Performance Fire Barrier Sealant, Pail Container
7100006311
MFG #: 7100006311
$977.73
/ DR
Non-Stock Item
- Base Type: Latex/Water
- Color: Red
- Container Size: 2 gal
- Container Type: Pail
- Country of Origin: US
- Fire Rating: 4 hr
- Flammability Rating: 1
- Form: Paste
- Manufacturer Name: 3M
- Odor/Scent: Negligible
- pH Range: 7.5 to 8
- Specific Gravity: 1.35
- Temperature Rating: 40 to 122 deg F
- Tensile Strength: 85 psi
- Type: High Performance
- VOC Content: <=6 g/L
3M™ Fire Barrier Sealant CP 25WB+ is a one-component, latex-based, intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. As penetrants are exposed to fire, the intumescent property of this material allows the sealant to expand and help maintain a firestop penetration seal for up to 4 hours. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire when installed in accordance with a listed through-penetration or fire-resistive joint assembly system (STC-Rating of 54 when tested in a STC 54-rated wall assembly). 3M™ Fire Barrier Sealant CP 25WB+ firestops blank openings and penetrations passing through fire-rated floor, floor/ceiling or wall assemblies and other fire-rated interior building construction. This halogen-free sealant is capable of expanding a minimum of 3 times its dried volume when exposed to temperatures above 1000°F (538°C). We engineered this sag-resistant sealant to exhibit strong adhesion to a full range of construction substrates and penetrants. Applied with conventional caulking equipment, this gun-grade sealant offers an excellent caulk rate - no mixing is required. In addition, this water-based sealant is paintable as well as re-enterable and repairable, offering easy application and clean-up.
- Item Features
- Application
- Standards
- Firestop tested for through-penetration applications for up to 4 hr
- Applied with conventional caulking equipment with excellent caulk rate
- Sealant is re-enterable and repairable
- Fire-resistance tested for static construction joint systems
- Sealant helps minimize sound transfer
- Helps prevent fire spread - capable of expanding a minimum of 3 times its dried volume when exposed to temperatures above 1000 degf (538 degc)
- Easy and clean application with no mixing required and sag-resistant properties, it is simple to apply and doesn't make a mess
- Use in accordance with ul systems not designed for applications with continuous exposure to extreme temperatures, such as chimneys
- Excellent adhesion to a variety of materials - engineered to exhibit strong adhesion to a full range of construction substrates and penetrants
- Sound damping - acts as a barrier to help minimize sound transmission
- Building code compliance - seals openings through fire barriers where mechanical services pass through
HVAC Ducts and Vents, Metallic and Non-Metallic Pipes, Blank Openings, Single and Bundled Cables, Insulated Pipe, Pipe and Cable through penetrations, Bus Ways, Combos, Rated Wall, Floor and Floor-Ceiling Assemblies and Static Construction Joints Applications
ACGIH Approved|AIHA Approved|ASTM Approved|ECCN: EAR99|EPA Certified|CMRG Certified|IBC Certified|IRC Certified|IFC Certified|IPC Certified|IMC Certified|NFPA 5000/101|NEC Certified|NFPA 70|OSHA Compliant|UL Listed|CAN/ULC S115