Russellstoll®

Russellstoll® Max-Gard® DS3414MP000 3-Phase Standard Waterproof Male Pin Plug With Screw Collar, 600 VAC, 30 A, 3 Poles, 4 Wires

DS3414MP000 MFG #: DS3414MP000
Requires Quote
Non-Stock Item
Russellstoll® Max-Gard® DS3414MP000 3-Phase Standard Waterproof Male Pin Plug With Screw Collar, 600 VAC, 30 A, 3 Poles, 4 Wires
  • Amperage Rating: 30 A
  • Country of Origin: MX
  • Dimensions: 7-7/8 in H
  • Frequency Rating: 60 Hz
  • Grade: Industrial
  • Manufacturer Name: ABB
  • Material: Cast Aluminum
  • NEMA Rating: NEMA 4X/6
  • Number of Poles: 3
  • Number of Wires: 4
  • Request For Quote: Yes
  • Temperature Rating: -40 to 130 deg C
  • Terminal Type: Pressure-Type Solderless Screw
  • Type: 3-Phase Standard Waterproof
  • Voltage Rating: 600 VAC
Russellstoll® Max-Gard® Male Pin Plug, 3-Phase Standard Waterproof, 600 VAC, 30 A, 60 Hz Frequency, 3 Pole, 4 Wires, NEMA 4X/6, Industrial Grade, -40 to 130 deg C, Pressure-Type Solderless Screw Terminal, Cast Aluminum, 7-7/8 in H Dimensions
QTY
Add to List
  • Standards
  • Application
  • Item Features
UL File No. E68085|CSA C22.2-182.1 File No. LR14096|OSHA Compliant|MIL-STD-105/1344|ASTM D570/D2565|NEMA PR4-1983|NEC Certified|IEC 309-1
For use in "People Movers" which require air conditioning and heater unit power when docked at end of line locations for maintenance and overhaul
  • With 1 in bushing
  • Without adapter and box
  • Waterproof construction provides environmental separation at the front of each device (they dont have to be connected together just to be called "watertight")
  • Center ground contact
  • 24-single rated factory polarizations
  • Gated deadfront construction
  • Two optional control contacts
  • O-rings/environmental separation, full line
  • Complete line epoxy powder coated - standard
  • All devices upon disconnect under load shall have provision so the arc is contained and extinguished within the insulation cavity, making it impossible to withdraw a live plug
  • All devices shall be factory polarized for amperage, voltage, frequency and phase, thus providing a single voltage rating, single interface system
  • The grounding of the device shall be accomplished through a separate center ground (earth) make first and break last pole on all devices for complete system grounding
  • All devices shall accommodate up to four power pins plus a separate center ground pin and they shall be integral with the connector bodies (five pins total)
  • Watertight capability shall be obtained by using a gasketed screw cap