EATON

Crouse-Hinds Arktite® NPJ10486 Corrosion-Resistant Heavy Duty Watertight Style 2 Mating Plug, 600 VAC, 250 VDC, 100 A, 4 Poles, 3 Wires, Gray

NPJ10486 MFG #: NPJ10486
$2,383.47 / EA
Non-Stock Item
Crouse-Hinds Arktite® NPJ10486 Corrosion-Resistant Heavy Duty Watertight Style 2 Mating Plug, 600 VAC, 250 VDC, 100 A, 4 Poles, 3 Wires, Gray
  • Amperage Rating: 100 A
  • Color: Gray
  • Country of Origin: US
  • Dimensions: 14-3/8 in Dia x 25-1/4 in L
  • Enclosure: NEMA 3/3R/4/12/4X
  • Frequency Rating: 50 to 400 Hz
  • Grade: Industrial
  • Manufacturer Name: Eaton
  • Material: Krydon® Fiberglass Reinforced Polyester
  • NEMA Rating: NEMA 3/3R/4/12/4X
  • Number of Poles: 4
  • Number of Wires: 3
  • Series: NPJ
  • Type: Corrosion-Resistant Heavy Duty Watertight Style 2
  • Voltage Rating: 600 VAC/250 VDC
Crouse-Hinds series Arktite non-metallic circuit breaking plugs, receptacles, cord connectors and motor plugs are used to supply power to portable electrical devices, such as welders, motors, pumps, conveyors and other similar equipment. Used in non-hazardous areas of chemical plants, sewage treatment facilities, cement plants, pulp and paper and food processing facilities, where electrical loads must be quickly disconnected from power sources.
QTY
Add to List
  • Item Features
  • Application
  • Standards
  • Style 2 grounded through extra pole and shell
  • Plugs are molded of Krydon® fiberglass reinforced polyester material which is highly-resistant to corrosion, heat, weathering and physical abuse
  • Grounding contact that make first and break last in the unlikely event of a keyway failure
  • Split-pin contact design provides 360 deg of electrical contact
  • Spring door provides environmental protection of receptacle (NEMA 4)
  • Keyed for a perfect match in the molded one-piece insulator housing
  • Sealing gaskets at all critical points inside Arktite® plug and receptacles protect against dust, dirt, mud, water and corrosive contaminants
  • Plugs can be used in both hazardous and non-hazardous areas when used with appropriately rated Arktite® receptacles
  • Total interchangeability with all existing Arktite® products for comparable ratings and configurations
  • A unique patented strain relief design prevents stress from reaching wire termination at the contact
  • 0.93 to 1.21 in Dia cord
  • 4 to 1 AWG (building), 4 to 2 AWG (extra flex) wire
Industrial Facilities and Factories, Facility, Power Distribution, Control, Welders, Motor-Generator Sets, Compressors, Conveyors and Wet Location Applications
CSA C22.2 File No. 182.1|cUL Listed|UL File No. 1010|UL File No. 1682