Crosby® 1017494 Anchor Shackle, 3.33 ton Load, 1/2 in, 0.63 in Dia Screw Pin, Hot Dipped Galvanized
1017494
MFG #: 1017494
$49.08
/ EA
Non-Stock Item
- Manufacturer: Crosby Group
- Series: G-209A
- Load Capacity: 3.33 ton
- Pin Diameter: 0.63
- Pin Type: Screw
- Inner Length: 1.88
- Inner Width: 1.31
- Opening Size: 0.81
- Eye Outer Size: 1.19
- Overall Length: 3.28
- Overall Width: 2.69
- Body Material: Forged Alloy Steel
- Pin Material: Alloy Steel
- Finish: Hot Dipped Galvanized
- Brand: Crosby®
Crosby® Anchor Shackle, Series: G-209A, 3.33 ton Load, 1/2 in Size, 0.63 in Pin Diameter, Screw Pin, 1.88 in Inner Length, 1.31 in Inner Width, 0.81 in Opening, 1.19 in Eye Outer, 3.28 in Overall Length, 2.69 in Overall Width, Forged Alloy Steel Body, Alloy Steel Pin, Hot Dipped Galvanized
- Forged alloy steel - quenched and tempered, with alloy pins
- Working load limit permanently shown on every shackle
- Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV,
- Approved for use at -40 to 204 deg C
- Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor,
- Importantly, these shackles meet other critical performance requirements including fatigue life, imp
- Capacities 2 - 21 metric tons
- Meets performance requirements of grade 8 shackles
- Load rated
- +/-0.13 in L tolerance
- +/-0.06 in W tolerance
Forged alloy steel - quenched and tempered, with alloy pins
Working load limit permanently shown on every shackle
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
Approved for use at -40 to 204 deg C
Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements
Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
Capacities 2 - 21 metric tons
Meets performance requirements of grade 8 shackles
Load rated
+/-0.13 in L tolerance
+/-0.06 in W tolerance