Powers® Power-Stud+® SD1 7452SD1 Wedge Expansion Anchor, 7/8 in Dia, 8 in OAL, 4-3/4 in L Thread, Carbon Steel, Zinc Plated

7452SD1-PWR MFG #: 7452SD1
$7.54 / EA
Powers® Power-Stud+® SD1 Wedge Expansion Anchor, 7/8 in Dia, 8 in Overall Length, 4-3/4 in Thread Length, Carbon Steel, Zinc Plated, 4-1/2 in Minimum Embedment Depth, 7/8 in Drill, 7/8-9, Threaded Stud Head, UNC, 3-5/8 in Maximum Work Thickness
QTY
  • Consistent performance in high and low strength concrete
  • Nominal drill bit diameter same as anchor diameter
  • Anchor can be installed through standard fixture holes
  • Length ID code and identifying marking stamped on head of each anchor
  • Anchor design allows for follow-up expansion after setting under tensile loading
  • 3/4 in nut height
  • 1-5/16 in wrench
  • 175 ft-lbf installation torque
  • 1 in fixture clearance hole
Consistent performance in high and low strength concrete
Nominal drill bit diameter same as anchor diameter
Anchor can be installed through standard fixture holes
Length ID code and identifying marking stamped on head of each anchor
Anchor design allows for follow-up expansion after setting under tensile loading
3/4 in nut height
1-5/16 in wrench
175 ft-lbf installation torque
1 in fixture clearance hole