Timken®

Timken® RAK2 3/16 RAK Normal Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6.937 in L Bolt Center-to-Center, 2.437 in Base to Bore Centerline, 8.752 in OAL x 4.969 in OAH

RAK-2-3/16 MFG #: RAK2 3/16
$326.71 / EA
Non-Stock Item
Timken® RAK2 3/16 RAK Normal Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6.937 in L Bolt Center-to-Center, 2.437 in Base to Bore Centerline, 8.752 in OAL x 4.969 in OAH
  • Base to Bore Centerline: 2.437 in
  • Base Width: 2.374 in
  • Bolt Center-to-Center Length: 6.937 in
  • Bore Diameter: 2-3/16 in
  • Bore Type: Round
  • Expansion Type: non-expansion (fixed)
  • Finish: Uncoated
  • Load Capacity: 9750 lb Dynamic/6570 lb Static
  • Locking Device: Eccentric
  • Manufacturer Name: Timken
  • Material: Cast Iron
  • Maximum Speed: 2710 rpm
  • Mounting Type: Two-Bolt Base
  • Overall Height: 4.969 in
  • Overall Length: 8.752 in
  • Overall Width: 2-13/16 in
  • Seal Type: Shroud
  • Series: RAK
  • Temperature Rating: 250 deg F
  • Type: Normal Duty
Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.
QTY
Add to List
  • Item Features
  • Application
  • Heavier than our standard block with solid, flat feet for increased strength
  • Compact, one-piece housing can be mounted in any position
  • Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
  • Pre-lubricated and ready for immediate installation
  • Grease fitting for relubrication
  • All units are supplied with self-locking collar
  • RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings
Agriculture, Food Processing, Fans, Blowers and Conveyors