Timken®

Timken® TAK1 3/4 TAK Normal Duty Pillow Block Ball Bearing Unit, 1-3/4 in Dia Bore, 5.88 in L Bolt Center-to-Center, 2.063 in Base to Bore Centerline, 7.531 in OAL x 4.126 in OAH

TAK 1 3/4 MFG #: TAK1 3/4
$436.97 / EA
Non-Stock Item
Timken® TAK1 3/4 TAK Normal Duty Pillow Block Ball Bearing Unit, 1-3/4 in Dia Bore, 5.88 in L Bolt Center-to-Center, 2.063 in Base to Bore Centerline, 7.531 in OAL x 4.126 in OAH
  • Base to Bore Centerline: 2.063 in
  • Base Width: 2.063 in
  • Bolt Center-to-Center Length: 5.88 in
  • Bore Diameter: 1-3/4 in
  • Bore Type: Round
  • Expansion Type: non-expansion (fixed)
  • Finish: Uncoated
  • Load Capacity: 7350 lb Dynamic/4600 lb Static
  • Locking Device: Eccentric
  • Manufacturer Name: Timken
  • Material: Cast Iron
  • Maximum Speed: 500 rpm
  • Mounting Type: Two-Bolt Base
  • Overall Height: 4.126 in
  • Overall Length: 7.531 in
  • Overall Width: 2-7/32 in
  • Seal Type: Tri-Ply Shroud
  • Series: TAK
  • Temperature Rating: 250 deg F
  • Type: Normal Duty
Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.
QTY
Add to List
  • Item Features
  • Application
  • Heavier than our standard block with solid, flat feet for increased strength
  • Compact, one-piece housing can be mounted in any position
  • Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
  • Pre-lubricated and ready for immediate installation
  • Grease fitting for relubrication
  • All units are supplied with G-KPPB tri-ply seal wide-inner-ring ball bearing and locking collar
  • TAK with G-KPPB (tri-ply seal) wide-inner-ring ball bearings
Agriculture, Food Processing, Fans, Blowers and Conveyors