Crouse-Hinds

Crouse-Hinds Condulet® LL350M Type LL Conduit Outlet Body, 3-1/2 in Hub, 5 Form, 292 cu-in Capacity, Malleable Iron, Hot Dipped Galvanized

LL350M MFG #: LL350M
$449.52 / EA
Non-Stock Item
Crouse-Hinds Condulet® LL350M Type LL Conduit Outlet Body, 3-1/2 in Hub, 5 Form, 292 cu-in Capacity, Malleable Iron, Hot Dipped Galvanized
  • Capacity: 292 cu-in
  • Connection Type: Thread
  • Country of Origin: IN
  • Dimensions: 16.5 in L x 7.13 in W x 6.81 in H
  • Enclosure: NEMA 4
  • Finish: Hot Dipped Galvanized
  • Form: 5
  • Hub Size: 3-1/2 in
  • Manufacturer Name: Eaton
  • Material: Malleable Iron
  • Type: Type LL
Form 5 malleable iron conduit bodies, covers and gaskets from Eaton's Crouse-Hinds Division are used in conduit systems to act as pull outlets for conductors being installed, provide openings for making splices and taps in conductors, make 90 degree bends in conduit runs, and provide access to conductors for maintenance and future system changes. Form 5 conduit bodies are manufactured in trade sizes 1/2" to 4", and are interchangeable with Appleton Form 35 conduit bodies. They are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.
QTY
Add to List
  • Application
  • Standards
  • Item Features
For providing openings for making splices and taps in conductors, connecting conduit sections and rigid/IMC conduit
cUL Listed|UL 514B File No. E15022|CSA C22.2 No. 18|Federal Specification W-C-586D
  • Interchangeable with Appleton® form 35 conduit bodies
  • Built-in rollers ON 1-1/4 to 4 in C and lb bodies to facilitate wire pulling
  • Smooth and rounded integral bushings for protection of wire insulation
  • Solid neoprene gaskets may be converted to open type by pulling out perforated center section
  • Stainless steel cover screws
  • Domed sheet steel covers provide additional cubic capacity
  • Integral gasket cover provides NEMA 4-rating
  • Act as pull outlets for conductors being installed
  • Act as mounting outlets for lighting fixtures and wiring devices
  • Provide taps for branch conduit runs
  • Make 90 deg bends in conduit runs
  • Provide for access to conductors for maintenance and future system changes
  • (3) 500 kcmil XHHW conductors
  • Sheet steel with or without integral gasket
  • Integral gasket ON cover or neoprene with perforation