Crouse-Hinds

Crouse-Hinds Condulet® LR100M Type LR Conduit Outlet Body, 1 in Hub, 5 Form, 12.5 cu-in Capacity, Malleable Iron, Electro-Galvanized/Aluminum Acrylic Painted

358291 MFG #: LR100M
$57.66 / EA
Non-Stock Item
Crouse-Hinds Condulet® LR100M Type LR Conduit Outlet Body, 1 in Hub, 5 Form, 12.5 cu-in Capacity, Malleable Iron, Electro-Galvanized/Aluminum Acrylic Painted
  • Capacity: 12.5 cu-in
  • Connection Type: Thread
  • Country of Origin: IN
  • Dimensions: 6.2 in L x 2.65 in W x 1.9 in H
  • Finish: Electro-Galvanized/Aluminum Acrylic Painted
  • Form: 5
  • Hub Size: 1 in
  • Manufacturer Name: Eaton
  • Material: Malleable Iron
  • Number of Hubs: 2
  • Type: Type LR
Form 5 malleable iron conduit bodies, covers and gaskets from Eaton Crouse-Hinds Division are used in conduit systems to act as pull outlets for conductors being installed, provide openings for making splices and taps in conductors, make 90 deg bends in conduit runs and provide access to conductors for maintenance and future system changes. Form 5 conduit bodies are manufactured in trade sizes 1/2 to 4 in and are interchangeable with Appleton Form 35 conduit bodies. They are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.
QTY
Add to List
  • Item Features
  • Standards
  • Application
  • Interchangeable with Appleton® form 35™ and O-Z/Gedney® malleable iron conduit outlet bodies
  • Act as pull outlets for conductor being installed
  • Smooth and rounded integral bushing for protection of wire insulation
  • Malleable iron construction provides high impact-resistance and durability
  • Zinc electroplate and aluminum acrylic paint finish for corrosion-resistance and durability
  • Solid neoprene natural finish gaskets may be converted to open type by pulling out perforated center section
  • Domed sheet steel-electro galvanized covers provide additional cubic capacity
  • Stainless steel self-retaining cover screw
  • New integral gasket sheet steel covers - NEMA 4 rated
  • For use with threaded rigid/IMC conduit
  • Provide taps for branch conduit run, make 90 deg bends in conduit run
  • Provide access to conductor for maintenance and future system changes
  • (3) 4 AWG XHHW maximum number of conductor
  • Right side access opening
  • Electro-galvanized with aluminum acrylic painted
CSA C22.2 File No. 18|cUL File No. E15022|cUL Listed|Federal/SPecification W-C-586D|UL File No. 514B
For providing openings for making splices and taps in conductors, connecting conduit sections, rigid conduit, commercial, institutional buildings, structures commercial and other applications