Crouse-Hinds

Crouse-Hinds Condulet® LR350M Type LR Conduit Outlet Body, 3-1/2 in Hub, 5 Form, 292 cu-in Capacity, Malleable Iron, Hot Dipped Galvanized

LR350M MFG #: LR350M
$449.52 / EA
Non-Stock Item
Crouse-Hinds Condulet® LR350M Type LR Conduit Outlet Body, 3-1/2 in Hub, 5 Form, 292 cu-in Capacity, Malleable Iron, Hot Dipped Galvanized
  • Capacity: 292 cu-in
  • Connection Type: Thread
  • Country of Origin: IN
  • Dimensions: 6.25 in L x 6.1 in W x 5.62 in H
  • Enclosure: NEMA 4
  • Finish: Hot Dipped Galvanized
  • Form: 5
  • Hub Size: 3-1/2 in
  • Manufacturer Name: Eaton
  • Material: Malleable Iron
  • Type: Type LR
Hot dip galvanizing is a form of galvanization. It is the technology of coating by passing the product through a molten bath of zinc at high temperature. The process of hot dip galvanizing results in a metallurgical bond between zinc and steel with a series of distinct iron zinc alloys. The hot dip zinc coating produces a much thicker, durable coating which prevents corrosion of the protected product by forming a physical barrier and by acting as a sacrificial anode if this barrier is damaged.
QTY
Add to List
  • Standards
  • Application
  • Item Features
cUL Listed|UL 514B File No. E15022|CSA C22.2 No. 18|Federal Specification W-C-586D
For providing openings for making splices and taps in conductors, connect conduit sections and rigid/IMC conduit
  • Interchangeable with Appleton® form 35 conduit bodies
  • Built-in rollers ON 1-1/4 to 4 in C and lb bodies to facilitate wire pulling
  • Smooth and rounded integral bushings for protection of wire insulation
  • Solid neoprene gaskets may be converted to open type by pulling out perforated center section
  • Stainless steel cover screws
  • Domed sheet steel covers provide additional cubic capacity
  • Integral gasket cover provides NEMA 4-rating
  • Act as pull outlets for conductors being installed
  • Act as mounting outlets for lighting fixtures and wiring devices
  • Provide taps for branch conduit runs
  • Make 90 deg bends in conduit runs
  • Provide for access to conductors for maintenance and future system changes
  • (3) 350 kcmil XHHW conductors
  • Sheet steel with or without integral gasket
  • Integral gasket ON cover or neoprene with perforation