Crouse-Hinds Condulet® SnapPack™ X100M CG Type X Conduit Outlet Body With Cover and Gasket, 1 in Hub, Form 5 Form, 15 cu-in Capacity, Malleable Iron, Electro-Galvanized/Aluminum Acrylic Painted
X100M CG
MFG #: X100M CG
$49.44
/ EA
Non-Stock Item
- Capacity: 15 cu-in
- Connection Type: Thread
- Country of Origin: IN
- Dimensions: 7.1 in L x 3.56 in W x 2.25 in H
- Enclosure: NEMA 3R
- Finish: Electro-Galvanized/Aluminum Acrylic Painted
- Form: Form 5
- Hub Size: 1 in
- Manufacturer Name: Eaton
- Material: Malleable Iron
- Type: Type X
Form 5 malleable iron conduit bodies, covers and gaskets from Eaton's Crouse-Hinds Division are used in conduit systems to act as pull outlets for conductors being installed, provide openings for making splices and taps in conductors, make 90 degree bends in conduit runs, and provide access to conductors for maintenance and future system changes. Form 5 conduit bodies are manufactured in trade sizes 1/2" to 4", and are interchangeable with Appleton Form 35 conduit bodies. They are also available with a hot dip galvanized finish for added corrosion protection against road salt and other harsh environmental factors.
- Standards
- Item Features
- Application
CSA C22.2 No. 18|Federal Specification W-C-586D|cUL Listed|UL 514B File No. E15022
- Interchangeable with Appleton® form 35 conduit bodies
- Built-in rollers ON 1-1/4 to 4 in C and lb bodies to facilitate wire pulling
- Smooth and rounded integral bushings for protection of wire insulation
- Solid neoprene gaskets may be converted to open type by pulling out perforated center section
- Stainless steel cover screws
- Domed sheet steel covers provide additional cubic capacity
- Integral gasket cover provides NEMA 4-rating
- Act as pull outlets for conductors being installed
- Provides openings for making splices and taps in conductors
- Act as mounting outlets for lighting fixtures and wiring devices
- Connect conduit sections
- Provides taps for branch conduit runs
- Makes 90 deg bends in conduit runs
- Provide for access to conductors for maintenance and future system changes
For IMC/rigid conduit