Crouse-Hinds Condulet® ET218 Short Radius Threaded Service Entrance Tee, 3/4 in, 1/2 in, 1/2 in Trade, 90 deg, Feraloy Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted
ET218
MFG #: ET218
Requires Quote
Non-Stock Item
- Angle: 90 deg
- Country of Origin: US
- Dimensions: 4 in W x 1-1/4 in D x 2-5/8 in H
- Finish: Electro-Galvanized/Aluminum Acrylic Painted
- Manufacturer Name: Eaton
- Material: Feraloy Iron Alloy
- Mounting Type: Flush
- Series: ET
- Suitable For Use With: Rigid/IMC Conduit
- Trade Size: 3/4 in, 1/2 in, 1/2 in
- Type: Short Radius Threaded
Crouse-Hinds series pull elbows are installed in conduit systems to make 90 deg bends in rigid or IMC conduit systems where space is limited or to connect rigid or IMC conduit to a box or enclosure. Pull elbows also act as outlets, with removable covers that provide access to conductors for maintenance and future system changes. Condulet® tees are installed in concealed conduit runs, allowing a single conduit stub-up to outlet boxes located above or below the main conduit run, eliminating separate feed and return conduits to a flush floor box or junction box.
- Item Features
- Application
- Standards
- Compact size, small radius of bend for use in concealed or open conduit system, particularly suited for use in shallow floors or partitions
- Taper tapped hubs and integral bushing for standard threaded conduit
Industrial Facilities and Factories, In Concealed Conduit Runs Allowing Single Conduit Stub Up To Outlet Boxes Located Above Or Below Main Conduit Run, Eliminates Separate Feed And Return Conduits To Flush Floor Box Or Junction Box and Hazardous Areas Applications
Class I Division 1, 2 Groups A/B/C/D|Class II Division 1, 2 Groups E/F/G|Class III|CSA C22 File No .2|Federal/SPecification WC-586a|UL File No. 514B|UL File No. 886