Crouse-Hinds
Crouse-Hinds Condulet® LBY55 LBY Series Threaded Service Entrance Elbow, 1-1/2 in Trade, 90 deg, Feraloy Iron Alloy, Electro-Galvanized/Aluminum Acrylic Painted
LBY55
MFG #: LBY55
$353.59
/ EA
Non-Stock Item
- Angle: 90 deg
- Country of Origin: IN
- Dimensions: 4-1/2 in L x 3-3/8 in W
- Finish: Electro-Galvanized/Aluminum Acrylic Painted
- Manufacturer Name: Eaton
- Material: Feraloy Iron Alloy
- Mounting Type: Flush
- Series: LBY Series
- Suitable For Use With: Rigid/IMC Conduit
- Trade Size: 1-1/2 in
- Type: Threaded
Crouse-Hinds series pull elbows are installed in conduit systems to make 90 deg bends in rigid or IMC conduit systems where space is limited or to connect rigid or IMC conduit to a box or enclosure. Pull elbows also act as outlets, with removable covers that provide access to conductors for maintenance and future system changes. Condulet® tees are installed in concealed conduit runs, allowing a single conduit stub-up to outlet boxes located above or below the main conduit run, eliminating separate feed and return conduits to a flush floor box or junction box.
- Item Features
- Application
- Includes
- Standards
- Warranty
- Maximum volume for bends within a compact overall size
- Screw on cover for ease of installation and removal
- cover opening ON an angle, per-mitting conductor to be pulled straight through either hub
- Taper tapped hubs and integral bushing for standard threaded conduit
- Make 90 deg bends in conduit system where space is limited
- Act as pull outlets
- Provide access to conductor for maintenance and future system changes
For service entrance elbows between service entrance and vertical weatherhead conduit runs, hazardous areas, Industrial Facilities and Factories applications
Cover
CEC Certified|Class I Division 1 2, Groups C/D, Class II, Division 1, Groups E/F/G, Class II, Division 2, Groups F/G, Class III|CSA C22.2|Federal/SPecification W-C-586a|NEC Compliant|UL File No. 886/514B/1203
Limited