Crouse-Hinds EBMBB WT30FDB36 Dust/Ignitionproof Raintight Explosionproof Circuit Breaker, 600 VAC, 30 A, 3 Poles

• Rugged, corrosion resistant
• Circuit breaker operating handle located through the right side wall of the body permits visual confirmation of correct component assembly and operation
• Total compliance to the wiring end room requirements of the National electrical Code®
• Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
• Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
• Copper free aluminum hinges allow the cover to swing well out of the way
• Stainless steel, quick release, captive, hex head cover bolts
• Stainless steel springs provide clear indication cover bolts are fully retracted from body
• Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers breakers
• Simple, straight forward installation of breaker on pre-drilled mounting plate within enclosure, mounting plate also field removable
• Circuit breaker external operating handle can be padlocked in either ON or OFF positions
• Neoprene cover gasket permanently attached to the cover seals out moisture
• Bodies have top and bottom drilled and tapped entrances for power conduits and control conduits
• Removable reducers are supplied, as standard, to accommodate smaller size conduits, all conduit entrances are plugged
• Tap-on mounting feet

General Motor Control, Circuit Protection, Indoor, Outdoor in Damp, Wet, Dirty and Dusty Locations

NEC Compliant|CEC Class I Div 1 and 2, Group B, C, D, Class II Div 1, Group E, F, G, Class III|UL 1203|CSA C22.2 No. 30