GE Spec-Setter™ TH3267C Type TH Dust-Tight Fused Standard Heavy Duty Safety Switch, 600 VAC, 800 A, 2 Poles
TH3267C
MFG #: TH3267C
Requires Quote
Non-Stock Item
- Actuator Type: Donut Handle
- Amperage Rating: 800 A
- Dimensions: 40.8 in W x 11.9 in D x 61.5 in H
- Enclosure Type: NEMA 1
- Finish: Powder Coated
- Frequency Rating: 50/60 Hz
- Insulation Type: Class L
- Manufacturer Name: ABB
- Material: Stainless Steel
- Mounting Type: 3/4-Point Welded Bracket
- Number of Poles: 2
- Number of Wires: 3
- Short Circuit Current Rating: 10 kA
- Terminal Type: Line/Load Lug
- Type: Type TH Dust-Tight Fused Standard
- Voltage Rating: 600 VAC
GE Spec-Setter™ Heavy Duty Safety Switch, Type TH Dust-Tight Fused Standard, 600 VAC, 800 A, 50/60 Hz, 2 Pole, 3 Wires, 10 kA Short Circuit Current Rating, Donut Handle Actuator, Class L Insulation, NEMA 1 Enclosure, 3/4-Point Welded Bracket Mount, Line/Load Lug Terminal, 40.8 in W x 11.9 in D x 61.5 in H, Stainless Steel, Powder Coated
- Standards
- Application
- Item Features
ARRA Compliant|Buy American Act Compliant|RoHS Compliant|UL 98|cUL Listed|CSA C22.2 No. 4-04|Federal Specification W-S-865C|NEMA KS1-2013|Seismic Certified
Commercial, Industrial and Indoor Applications
- Bright red "donut" handle molded from rugged SE1 noryl thermoplastic is easy to see, easy to grip and ideal for hook stick operation, it accepts 3-padlocks in OFF position
- Coin proof, defeatable dual interlocks meet all safety inspection requirements
- Wide, unobstructed gutter and removable interior make wire pulling and lug connections quick and easy
- 3-point mounting pattern speeds installation and simplifies ganging in close quarters
- Clear line shield allows visual verification of blade position while guarding against accidental contact with live parts
- Accessories, such as auxiliary switch kits, are UL Listed for quick and easy field installation (or they may be factory installed)
- Plated blades provide visible confirmation of contact position
- Direct drive, quick make, quick break mechanism "snaps" the contacts open and closed, providing positive ON/OFF indication while prolonging switch life
- Spring reinforced fuse clips assure reliable contact for cool operation, suitable for Class H, K, J or R fuses
- Cu/Al lugs are 60/75 deg C rated to permit greater wire selection
- Galvanized steel enclosure offers superior rust protection in outdoor applications, there's also a durable polyester powder coated finish
- Designed for commercial and industrial applications where safety, high performance and continuity of service are essential
- Suitable for use as service equipment when installed in accordance with the Canadian Electrical Code®
- Full cover interlocks
- Dead front switches