Crouse-Hinds

Crouse-Hinds EBMSFB Magnetic Single-Speed Non-Reversing Line Starter Enclosure, 14.38 in W x 12.13 in D, NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12, Copper-Free Aluminum

EBMSFB MFG #: EBMSFB
$6,571.16 / EA
Non-Stock Item
Crouse-Hinds EBMSFB Magnetic Single-Speed Non-Reversing Line Starter Enclosure, 14.38 in W x 12.13 in D, NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12, Copper-Free Aluminum
  • Country of Origin: US
  • Cover Type: Hinged
  • Depth: 12.13 in
  • Electrical Ratings: 120/600 VAC, 7-1/2 to 25 hp, 60 Hz
  • Lock: Padlock
  • Manufacturer Name: Eaton
  • Material: Copper-Free Aluminum
  • Mounting Type: Tap-On/Feet
  • NEMA Rating: NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12
  • Type: Magnetic Single-Speed Non-Reversing
  • Width: 14.38 in
Crouse-Hinds Line Starter Enclosure, Magnetic Single-Speed Non-Reversing, 14.38 in Width, 12.13 in Depth, NEMA 3/3R/4/4X/7B/7C/7D/9E/9F/9G/12, Hinged Cover, Lock: Padlock, 120/600 VAC, 7-1/2 to 25 hp, 60 Hz, Tap-On/Feet Mount, Copper-Free Aluminum
QTY
Add to List
  • Application
  • Standards
  • Item Features
For damp, wet, dirty, dusty hazardous locations and EBMS magnetic line starters
CSA C22.2 No. 30|Class I Div 1 and 2 Groups B, C, D, Class II Div 1 and 2 Groups E, F, G, Class III|UL 1203
  • Rugged, corrosion-resistant, cast copper-free aluminum construction
  • Motor starter operating handle located through the right side wall of the body permits visual confirmation of correct component assembly and operation
  • Total compliance to the wiring end room requirements of the National electrical Code® and Canadian electrical code
  • Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
  • Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
  • copper-free aluminum hinges allow the cover to swing well out of the way
  • Stainless steel, quick release, captive, hex head cover bolts
  • Stainless steel springs provide clear indication cover bolts are fully retracted from body
  • Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers' starters
  • Simple, straightforward installation of starter ON pre-drilled mounting plate within enclosure, mounting plate also field removable
  • Neoprene cover gasket permanently attached to the cover seals out moisture
  • Bodies have top and bottom drilled and tapped entrances for power conduits plus one at the bottom for control conduit, removable reducers are supplied as standard, to accommodate smaller size conduits, all conduit entrances are plugged
  • To provide motor overload and undervoltage protection
  • Optional EMPS control devices may be added to enclosure cover
  • Steel bracket for lifting larger enclosures during installation supplied as standard
  • In areas where frequent wash downs are necessary or where heavy rain or water spray is prevalent
  • For across the line starting, stopping, speed changing and reversing of polyphase AC induction motors
  • Size 2 FVNR starter
  • B enclosure size symbol
  • 2 in J conduit entry trade