DeWALT®️ Anchors & Fasteners™ PFC1271110 High Strength Anchor Adhesive, Concrete to Steel Connection Design, For Use With Threaded Rod and Reinforcing Bar Hardware Elements

High strength anchoring: bonding threaded rod and reinforcing bar into hardened concrete, Rebar development length and lap splice connections in concrete up to 60d embedments, Evaluated for installation and use in dry and wet concrete (including water-filled holes), Cracked and uncracked concrete conditions as well as wind and seismic loading (SDC A - F), Oversized hammer-drilled holes in concrete, for short term loading only (see www.DEWALT.com), Can also be considered for filling large cracks and abandoned holes in concrete and masonry

• Fast curing system which can be applied in structural applications as low as 14 deg F (-10 deg C)
• Evaluated and recognized for freeze/thaw performance and sustained loading
• Can be used in a wide range of embedments in low and high strength concrete
• Cartridge design allows for multiple uses using extra mixing nozzles
• Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
• Evaluated and recognized for long term and short term loading (see performance tables)
• In-service temperature ratings between -40 deg F (-40 deg C) and 320 deg F (160 deg C)

International Code Council, Evaluation Service (ICC-ES) ESR-4027|2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC, and 2012 IBC/IRC|ACI 355.4, ASTM E488, and ICC-ES AC308|Accredited Independent Testing Laboratory|Tested and qualified|City of Los Angeles, LABC and LARC Supplement (within ESR-4027)|Florida Building Code, FBC Supplement including HVHZ (within ESR-4027)|European Technical Approval, ETA-16/0905 (adhesive anchors), ETA-16/0904 (post-installed rebars)|Compliant with NSF/ANSI 61|Compliant to California DPH|Conforms to requirements of ASTM C881 including C882 and AASHTO M235, Types I, II, IV and V, Grade 3, Class A and conforms to requirements of ASTM C881 Types I and IV, Grade 3, Class B