ABB AF140-30-11-13 AF140 3-Phase AC/DC Operated IEC Contactor, 100 to 250 VAC/VDC V Coil, 130 A, 3NO Contact, 3 Poles
AF140-30-11-13
MFG #: AF140-30-11-13
Requires Quote
Non-Stock Item
- Coil Power Rating: 75 kW, 100 hp, 125 hp
- Coil Voltage: 100 to 250 VAC/VDC
- Connection Type: Cable Clamp
- Contact Configuration: 3NO
- Contact Type: Non-Reversing
- Country of Origin: SE
- Dimensions: 150 mm H x 90 mm W x 126 mm D
- Enclosure Type: IP00/IP20
- Frequency Rating: 50/60 Hz
- Manufacturer Name: ABB
- Maximum Load Current: 130 A
- Number of Auxiliary Contacts: 1NO-1NC
- Number of Poles: 3
- Operating Cycles: 5000000 Cycles
- Operating Temperature: -25 to 50 deg C
- Series: AF140
- Size: 140 Frame
- Terminal Type: Screw
- Type: 3-Phase AC/DC Operated
- Wattage: 75 kW
AF series contactors are provided in either three or four power pole configurations with a variety of accessories including auxiliary contacts, close coupling adaptors, interlocks and busbars.
- Item Features
- Application
- Includes
- Standards
- Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100 to 250 VAC and DC), only 4 control voltages ranges covering 24 to 500 V 50/60 Hz and 20 to 500 VDC
- AF series contactor coils are designed to utilize both AC (50/60 Hz) and DC control circuit inputs ranging from 24 to 500 VAC
- Main poles and auxiliary contact blocks 3 main poles, 1 built-in auxiliary contact, front and side mounted add-on auxiliary contact blocks (mechanically linked auxiliary contacts compliant with Annex L of IEC 60947-5-1)
- 8 kV rated impulse withstand voltage
- 600/690 VAC rated insulation voltage
- 3000 m maximum operating altitude permissible
- 40 hp at 208 VAC, 100 hp at 440/480 VAC, 125 hp 550/600 VAC, 50 hp at 220/240 VAC, 40 hp at 200 VAC 3-phase power rating
- Reduced panel energy consumption
- Very distinct closing and opening
- Can withstand short voltage dips and voltage sags
- Built-in surge suppression
- 130 A at 220 to 240 VAC 3-phase UL/CSA
- AF contactors can manage large control voltage variations one coil can be used for different control voltages used worldwide without any coil change
For controlling 3-phase motors and power circuits up to 690 VAC and 260 VDC, motor starting, isolation, by-pass and distribution application up to maximum 690 V
Surge Suppression
RoHS Compliant|CCC Compliant|RINA Approved|UL 508|CSA C22.2 No. 14|IEC/EN 60947-4-1/60947-4-1A/60947-4-1-07|CCC Certified