EATON
EATON OS106D1-W Motion Activated 1-Pole Wallbox Dimmer Sensor, 120 VAC, Occupancy Sensor, 1000 sq-ft Coverage, 180 deg Viewing, Flush Mount
OS106D1-W
MFG #: OS106D1-W
$115.79
/ EA
Non-Stock Item
- Color: White
- Connection Type: 14 AWG Pre-Stripped Wire Lead
- Control Output: Auto ON/OFF/Manual ON/OFF
- Country of Origin: CN
- Coverage: 1000 sq-ft
- Dimensions: 3.31 in L x 2.88 in W x 5.44 in H
- Interface: Wireless RF
- Lamp Type: Incandescent/MLV/Halogen
- Manufacturer Name: Eaton
- Material: Polycarbonate
- Mounting Type: Flush
- Power Rating: 600 W
- Response Frequency: 60 Hz
- Sensor Type: Occupancy
- Temperature Rating: 32 to 104 deg F
- Time Delay: 5 s to 30 min
- Type: Motion Activated 1-Pole Wallbox
- Viewing Angle: 180 deg
- Voltage Rating: 120 VAC
Enjoy advanced energy savings and state-of-the-art automation with Eaton's occupancy and vacancy sensors. Eaton's motion sensor lighting controls use advanced Passive Infrared (PIR) and ultrasonic sensing technology to detect your presence and switch lights ON. Then, once you ve left the room, our sensors turn the lights OFF following a preset period of time. Sensors are the perfect solution for commercial and residential applications where a switch is inconveniently located and in spaces where lights may be left on accidentally.
- Standards
- Item Features
- Application
ANSI/IEEE C62.41-1980|California Title 20 Compliant|cULus Listed to UL 244A, File #E325082|NOM 426|UL 94|UL 20|UL 1472
- Soft on/fade off
- Preset and light level change is easily shown with horizontal row of green LEDs
- Works will popular load types halogen, incandescent and magnetic low-voltage
- Single green LED indicates load status, provides locator light in dark and blinks to indicate motion detection
- Push pad design provides minimal travel and crisp actuation
- Provides 180 deg field of view and 1000 sq-ft of major motion coverage
- Selectable time delay of 5 s (test), 5 min, 15 min and 30 min for lights to remain on after room is vacated
- Reverse mode allows light to stay off in a room when motion is detected
- Occupancy sensors time delay default set to 5 min, vacancy sensors time delay default set to 30 min
- Occupancy sensor provides a selectable ambient light override preventing lights from switching on when there is acceptable natural light
- Occupancy sensor version allows to toggle between auto on/auto off or manual on/auto off mode with a simple press and hold of switch
- Occupancy sensor provides for a bypass feature to allow the sensor to perform as a traditional switch (manual on/manual off)
- Electrostatic discharge protection
- No leakage to load in off mode
- Uniform color matched PIR lens to device housing
- Color change faceplate kits provide for a simple in field change
- Neutral required for installation of device
Enlight and Residential Applications