Crouse-Hinds

Crouse-Hinds Light-Pak™ ELPS502 Emergency Lighting System, 14 W Halogen Lamp, 120 VAC, 1 Heads, Aluminum

ELPS502 MFG #: ELPS502
$19,016.43 / EA
Non-Stock Item
Crouse-Hinds Light-Pak™ ELPS502 Emergency Lighting System, 14 W Halogen Lamp, 120 VAC, 1 Heads, Aluminum
  • Amperage Rating: 0.5 A
  • Base Type: G4
  • Color: Green
  • Country of Origin: US
  • Dimensions: 29.63 in L x 14.75 in H x 6.5 in H
  • Enclosure Type: NEMA 3/3R/12
  • Fixture Wattage: 28 W
  • Frequency Rating: 50/60 Hz
  • Lamp Type: Halogen
  • Lamp Wattage: 14 W
  • Manufacturer Name: Eaton
  • Material: Aluminum
  • Number of Heads: 1
  • Power Source: Ni-Cd Battery
  • Series: ELPS
  • Voltage Rating: 120 VAC
Crouse-Hinds Light-Pak™ Emergency Lighting System, Series: ELPS, 120 VAC, 28 W Fixture, 0.5 A, 50/60 Hz Frequency, Halogen Lamp, 14 W Lamp, G4 Base, 1 Heads, Ni-Cd Battery Power Source, NEMA 3/3R/12 Enclosure, 29.63 in L x 14.75 in H x 6.5 in H Dimensions, Aluminum, Green
QTY
Add to List
  • Item Features
  • Application
  • Standards
  • Compact factory sealed luminaries assemblies are each furnished with a 12 W tungsten halogen lamp and inner reflector for appropriate photometric in hazardous areas
  • Luminaries assemblies are fully adjustable and lockable on two axes to provide flexible and consistent light aiming capabilities
  • Luminaries lens ring is threaded for easy relamping and locks in place with hex head set screws, will not loosen due to vibration
  • Ground joint cover with external flange design permits large opening and easy access to internal components, stud bolts in diagonally opposite corners of body ease cover removal and installation
  • Neoprene cover gasket seals out moisture for superior protection of internal components against wetness and corrosion
  • Lightweight compact size, and mounting feet ease installation and allow placement in confined areas
  • Two 1 in NPT drilled and tapped conduit openings, with plugs, are standard, for choice of top or bottom feed
  • Factory installed push-to-test pushbutton enables easy testing of system
  • Main power on pilot light indicates AC power is being supplied to the battery charger, pilot light jewel is threaded for easy lamp replacement
  • Stainless steel drain minimizes moisture collection, stainless steel breather with aluminum cap provides ventilation, minimizes moisture collection
  • CID 101 corrosion inhibitor device is provided with each ELPS system to help protect electrical components and connections
  • Rugged, long life, maintenance free, nickel cadmium battery provides 30 W of power for the required 11/2 hr
  • Solid state battery charger for long life and reliable service prevents deep discharge by automatically disconnecting luminaries from battery
  • Terminal block facilitates field wiring connections
  • Instruction sheet and maintenance record card provided with unit in a protective plastic envelope
  • A time delay is standard, time delay is preset at factory for 5 min delay but can be field set for 5 sec or 15 min, thus allowing HID type lamps time to restrike and reach desired illumination levels
  • Copper-free aluminum with powder coat epoxy paint finish
  • 90 min battery back up and halogen lamps
Refineries, Chemical, Petrochemical Facilities, Grain Processing, Handling Or Storage Facilities, Manufacturing Plants, Wastewater Treatment Facilities and Other Areas Applications
PROP65: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov