Crouse-Hinds Pauluhn™ HazMax™ Pinnacle DP22571L Linear Fluorescent Luminaire With Cast End Cap, Lamp, (2) 2 ft F24/T5HO Fluorescent Lamp, 120 to 277 VAC, Natural Housing
DP22571L
MFG #: DP22571L
$2,248.66
/ EA
Non-Stock Item
- Ballast Type: Electronic
- Country of Origin: US
- Dimensions: 27.6 in L x 6.5 in W x 6.3 in H
- Enclosure Type: NEMA 4/IP66
- Housing Finish: Natural
- Housing Material: Copper-Free Aluminum
- Lamp Base Type: G5 Mini Bi-Pin
- Lamp Type: 2 ft F24/T5HO Fluorescent
- Lamp Wattage: 24 W
- Lens Type: Clear Acrylic
- Manufacturer Name: Eaton
- Mounting Type: Surface
- Number of Lamps: 2
- Series: DP Series
- Voltage Rating: 120 to 277 VAC
The Pauluhn DuraPro is a linear fluorescent fixture for Class I, Division 2, Class I, Zone 2 and Class II, Division 2 locations. The DuraPro has a Type 4 and IP66 rating, and it features an acrylic lens designed to withstand constant exposure to sunlight and contact with petroleum based products. Constructed of extruded aluminum with T5, T5HO, T8, T8HO and T12HO lamps, the DuraPro is available in two and four foot length fixtures in 2-, 3- or 4-lamp configurations. An optional emergency battery back-up is also available.
- Application
- Standards
- Item Features
Land Based Drilling, Hazardous Locations, Watertight Requirement, Dusttight Requirement, Oil, Gas Exploration, Production, Waste Water Treatment Plant, Pipeline Compressor, Pumping, Storage, Maintenance, Lubrication Pits, Petrochemical Facilities and High Abuse Areas
Class I Division 2 Group A, B, D|Class I Zone 2 Group IIA, IIB, IIC|Class II Division 2 Group F, G|Class III|UL 844|UL 1598|CSA Class 3428 03|CSA Class 3428 83
- Fluorescent system provides energy savings up to 50% when compared to HID
- Multi-voltage electronic ballast resistant to brownouts or voltage and frequency fluctuations
- Field replaceable lens and gasket
- Acrylic lens withstands constant exposure to sunlight and contact with petroleum based products
- Neoprene gaskets resist petroleum
- Permanent safety cable mounting points at each end
- Fixture may be mounted horizontally or vertically and rotated up to 270 deg
- Toolless entry via heavy duty twist draw latches
- Lens frame hinged on side for easy lamp replacement
- Spring loaded Lampholders for linear lamps resist shock and vibration
- 1/2 in feed-through NPT hubs