CM®

CM® M853AG Anchor Shackle, 9.5 ton Load, 7/8 in, 1 in Dia Bolt/Nut/Cotter Pin, Galvanized

10846383 MFG #: M853AG
$0.00 /
Out Of Stock
CM® M853AG Anchor Shackle, 9.5 ton Load, 7/8 in, 1 in Dia Bolt/Nut/Cotter Pin, Galvanized
  • Body Material: Alloy Steel
  • Country of Origin: US
  • Eye Outer Size: 2-3/8 in
  • Finish: Galvanized
  • Inner Length: 3.312 in
  • Inner Width: 2 in
  • Load Capacity: 9.5 ton
  • Manufacturer Name: Columbus McKinnon
  • Opening Size: 1.438 in
  • Pin Diameter: 1 in
  • Pin Material: Alloy Steel
  • Pin Type: Bolt/Nut/Cotter
  • Size: 7/8 in
CM® Anchor Shackle, 9.5 ton Load, 7/8 in Size, 1 in Pin Diameter, Bolt/Nut/Cotter Pin, 3.312 in Inner Length, 2 in Inner Width, 1.438 in Opening, 2-3/8 in Eye Outer, Alloy Steel Body, Alloy Steel Pin, Galvanized
Finish
  • Item Features
  • Standards
  • Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
  • Shackles show major deformation before failure
  • Working load limit and traceability codes shown as permanent markings on body
  • All shackles have alloy quenched and tempered pins
  • Provides the most secure pin arrangement
  • Resists axial loading and torsional loading
  • Anchor shackles can be side loaded or used for multiple connections
  • Special products engineering available to fit your special lifting, tie down and pulling needs
  • 5:1 design factor
  • https://www.youtube.com/watch?v=r8O7SknMrIs
Federal Specification RR-C-271D