CM®
CM® M848A Anchor Shackle, 2 ton Load, 3/8 in, 0.44 in Dia Bolt/Nut/Cotter Pin, Self-Colored
M848A
MFG #: M848A
$46.37
/ EA
Non-Stock Item
- Body Material: Alloy Steel
- Country of Origin: US
- Eye Outer Size: 1 in
- Finish: Self-Colored
- Inner Length: 1.4 in
- Inner Width: 1 in
- Load Capacity: 2 ton
- Manufacturer Name: Columbus McKinnon
- Opening Size: 0.66 in
- Pin Diameter: 0.44 in
- Pin Material: Alloy Steel
- Pin Type: Bolt/Nut/Cotter
- Request For Quote: No
- Size: 3/8 in
CM® alloy shackles are designed with a 5:1 design factor and have a strength rating approximately 50% higher than a comparable sized carbon shackle and about 25% stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.
- Standards
- Item Features
ASTM Certified|SAE J429|ASME B30.26|EN 13889|ANSI B18
- 3/8 to 2 in sizes made in the USA from domestic (USA) Special Bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
- 2-1/2 to 3-1/2 in sizes forged form high quality German alloy steel at our STB facility in Hamm, Germany and then finished in the USA
- Shackles show major deformation before failure
- CM® shackles are forged to shape rather than bent like the competition, this allows for better shackle identification markings and dimensional consistency
- Working load limit and traceability codes shown as permanent markings on body
- All shackles have alloy quenched and tempered pins
- Shackles meet dimensional and performance requirements of RR-C-271