Koyo IR-1216 Inch Series Regular Width Inner Ring, 3/4 in ID x 1 in OD, 1.015 in OAW, For Use With B-1616, BH-1614, BH-1616, J-1616, JH-1616, M-16161, MH-16161, MJ-16161, MJH-16161 Drawn Cup Needle Roller Bearing, Steel
IR1216
MFG #: IR-1216
Requires Quote
- Request For Quote: Yes
Koyo Inner Ring, Regular Width, Series: IR Inch Series, 3/4 in ID, 1 in OD, 1.015 in Overall Width, For Use With: B-1616, BH-1614, BH-1616, J-1616, JH-1616, M-16161, MH-16161, MJ-16161, MJH-16161 Drawn Cup Needle Roller Bearing, Steel, Polished Chrome
- Ideal choice when shaft is not practical to use as inner raceway
- Designed to meet established inch tolerances
- Designed to be wider than matching drawn cup bearing
- Maximum shaft fillet radius cannot exceed inner ring bore chamfer
- Designed to provide a loose transition fit on the shaft and should be axially clamped against a shou
- If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, t
- After mounting, if OD of inner ring exceeds the required raceway diameter for matching bearing, ring
Ideal choice when shaft is not practical to use as inner raceway
Designed to meet established inch tolerances
Designed to be wider than matching drawn cup bearing
Maximum shaft fillet radius cannot exceed inner ring bore chamfer
Designed to provide a loose transition fit on the shaft and should be axially clamped against a shoulder
If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD must not exceed the raceway diameter for the matching drawn cup bearing after being mounted on the shaft
After mounting, if OD of inner ring exceeds the required raceway diameter for matching bearing, ring should be ground to proper diameter while mounted to shaft